Tweet
One thing I didn't try wasto throw it in....???
-
HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin one -
You can try that or play with the strut height and COG.Government Moto:
"Why fix it? Blame someone else for breaking it."Comment
-
pics pleaseComment
-
I have to log off but I will post pic's tomorrow....
Can anyone remind me how to cut my pic's down to size?Last edited by KillerDave; 03-21-2010, 04:34 PM.HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
For cutting pics down I open them in Paint, click along the top on "image" then click "stretch scew" then resize them smaller by reducing the percentage in the two boxes.
My first thought of speed would be, is there any real confirnation of the stock twin set up doing 60mph (100kph)???? Other than , "the website says so." And it says "best speed" so I wouldnt base anything on that unless someone chimes in w/ proven results. HOWEVER, your should be going much better than walking speed.
Yes, we need pics, inside, outside, strut angles, etx etc. to help you out. And unless I missed something somewhere else, what 380Ls are you running?Comment
-
Image re-sizer for wiindows 7
For xp
(look down the column on the right for "image re-sizer"
Both of these add resizing images to the right click.Comment
-
UPDATE
Stingers have made it across the seas! They are in NJ, so hopefully I will see them by mid week. Then all Im waiting on is a rudder.
Comment
-
Comment
-
Dave, I hope that will help you
Comment
-
My COG is exactly 220mm from the transom as shown....
One other differance is the EKOS uses 36mm plastic props..... My boat just sits with its nose in the air and dragging it A**E in the water... GGgggrrrrrrrrrrr!!!!!!
My wife shot a qick video of it and I will post it to YouTube tonight when I post pic's on here..... Can I Post video on here too????HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
Another thing I am going to do is try to check my prop Free running RPM....HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
Comment
-
Ok... It's 35mm dia' and 1.4 pitch....3514????HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
are they counter rotating or both the same
Comment
-
Just making sure before I gave you mis information. Not that it shouldnt be pushing it better than it is.. but that is a moderately high lift prop for hydros and deep vs. Possibly change props? X or M seriesComment
Comment