Aeromarine Titan 29 Build

[cybercrxt]

I had a 9xl in one, did 49mph on radar with an x642 prop. It was all I could do to keep the boat from bouncing and blowing off. If you ran it wet, it would just overheat the motor. Cool boat, but it was my first, and last mono FE!

[Brushless55]

I agree, these are cool boats.. but I want it to run like it looks!

[Dragonturbo3]

I bought this one (5in) it looked big when I opened the package but next to the boat it looks just right.

And this is the stinger I bought.

[wakeboardfusion]

nice hardware, wheres it from?

[andym]

nice hardware, wheres it from?

ose

[BHChieftain]

Also if someone can point me to a thread with tips on how to paint a hull. I can do one color no problem, but I kind of want to have a nice looking boat when I am done.

Not sure if you saw these painting tips in the OSE Tips section--

http://www.offshoreelectrics.com/inf..._Tips_&_Info__

-Chief

[Norman2]

Titan 29

Hi, Attached photos of my Titan 29. I elected not to paint mine and just clear coated
after graphics. I run An Ammo 36-50-2300 on 4S with Octura X640 and the boat
has no problem with handling either in the straight or in turns. It used to wobble from side to
side until I installed trim tabs.

[Dragonturbo3]

Not sure if you saw these painting tips in the OSE Tips section--

http://www.offshoreelectrics.com/inf..._Tips_&_Info__

-Chief

Thanks, that is what I was looking for.

Hi, Attached photos of my Titan 29. I elected not to paint mine and just clear coated
after graphics. I run An Ammo 36-50-2300 on 4S with Octura X640 and the boat
has no problem with handling either in the straight or in turns. It used to do that until I installed trim tabs. Regards
Norman

Nice boat! I now realize I bought the wrong size turn fins. Going to order some of the right size and save the others for a smaller hull later.


Thanks for all the help guys.