Tweet
OSE sells that thrust bearing.
-
Mini Cat Racing USA
www.minicatracingusa.com -
If you want to install a thrust bearing buy high quality In french material is INOX this metal will never rust
SKF is very high quality
For very high RPM SKF double level bearings
Comment
-
I think I will strart paint job this week-endLast edited by Alfa Spirit; 01-10-2010, 01:49 PM.Comment
-
I wanted to find air intakes for my HOTR but I didn' t find nice parts so I bought those air louvre. they will be painted.
Let me know what you think
Last edited by Alfa Spirit; 01-14-2010, 09:08 AM.Comment
-
If you like then, that's all that matters! The HOR32 is lacking in detail and I would love to do a scale paint job including all the hatches and arials and so on but I think I will leave that for a bigger hull....HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
i think the whole point of a cheap build is to be simple too, i would just do a simple color. And invest the money on other parts of the build.Comment
-
A cheap build must be simple ok, and can be nice too
MBP Racing drive dog
Dogdrivemitnehmer 3/16" 10mm, 7,40 € - MBP-RC
Graupner drive dog
MHZ drive dog
Comment
-
I love the MBP unit! Very slick!!!HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
I' m agree, the MBP Racing DD is nice part and easy to use. I think I' ll glue air louvre on the hatch ...Last edited by Alfa Spirit; 01-18-2010, 10:19 PM.Comment
-
You may want to paint those parts before you glue them on. Plastic parts benefit from an adhesion promoter such as Bulldog before painting - this will help to keep the paint from pealing or scratching off.IMPBA 20481S D-12Comment
-
Also, I cut open the air intake above the canopy.... Have a look at the pic's in my profile.....Last edited by KillerDave; 01-11-2010, 08:06 PM.HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
This is the cut-out on my HOR32.....HPR C-5009, Riptide48, PaynPak 1/12, Miss Budweiser 1/8 Hydro, Miss Freya (own design 1/8 Hydro), HOR 32, Twin 380 HOR 32, Magin oneComment
-
Comment