Rio Roses Fountain

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • G Doggett
    Senior Member
    • Apr 2007
    • 446

    #61
    Still haven't had a chance to get her wet yet, been away on holiday for a few days, but last night I put the decals on to finish the semi scale look.
    I finally found a picture of this particular Rio Roses in an old boat mag and a local sign shop made them up for $20.
    She looks a little bit plain, but I guess Reggie was going through an un-flamboyant stage when he raced this boat. ( Hard to imagine I know !)
    Maybe this weekend I will get to give her a run so she wont feel like a 'shelf queen'.
    Graham.
    Attached Files
    Last edited by G Doggett; 09-21-2009, 12:02 AM. Reason: typo

    Comment

    • sailr
      Fast Electric Addict!
      • Nov 2007
      • 6927

      #62
      very nice. Nothing wrong with plain! Very clean looking. Good sign shop to do that for only $20!
      Mini Cat Racing USA
      www.minicatracingusa.com

      Comment

      • tiqueman
        Fast Electric Addict!
        • Jul 2009
        • 5669

        #63
        She looks great Graham!
        Geico epoxy laminate hatch sale thread Black Jack epoxy laminate hatch sale thread
        HPR06 6S Twin HOTR Genesis (SOLD) Vantex 32" cat Geico racing
        WEST FL MODEL BOAT CLUB www.scottskiracing.com

        Comment

        • crabstick
          Senior Member
          • Jul 2008
          • 954

          #64
          As always, a very tidy clean job Graham.
          Matt.
          FE, Nitro and Gas racing in Auckland
          www.rcboats.co.nz

          Comment

          • crabstick
            Senior Member
            • Jul 2008
            • 954

            #65
            Any test run yet Graham?

            you Missed some great weather at hakanoa yesterday. Water was flat all day.
            Matt.
            FE, Nitro and Gas racing in Auckland
            www.rcboats.co.nz

            Comment

            • G Doggett
              Senior Member
              • Apr 2007
              • 446

              #66
              Originally posted by crabstick
              Any test run yet Graham?
              No mate, just been too busy.
              The last few weekends have been spent up at Leigh where we are planning to build a house.
              Don't you hate it when these trivial matters get in the way of your hobby.!!!!
              Graham.

              Comment

              • crabstick
                Senior Member
                • Jul 2008
                • 954

                #67
                Fair enough, Yes i hate it when things like work, the wife and other matters get in the way of boating!!
                Matt.
                FE, Nitro and Gas racing in Auckland
                www.rcboats.co.nz

                Comment

                • G Doggett
                  Senior Member
                  • Apr 2007
                  • 446

                  #68
                  Finally got to give her a maiden voyage this morning with mixed results.

                  First the good news - 40 mph target speed reached with GPS reading of 42.6 mph.and temps were all OK after 1 minute run.
                  BUT - Eagle Tree showed average current draw of 70 amps and peaks of 88 amps with an X438 prop. (Eeeek, motor is only rated at 55 amps)
                  So plan B is to replace the $29.95 2200 KV motor with a $31.95 KD36-74-9XL with a 1900 KV rating to try and reduce the current but keep the same top speed.
                  That's $2 over budget but damn the expense.
                  It's hosing down with rain again now so next step in 'project el cheapo' will have to wait til next weekend.
                  Graham.

                  Comment

                  • tylerm
                    Senior Member
                    • Nov 2007
                    • 310

                    #69
                    How did the boat itself handle Graham?

                    I would have thought if the temps on the mtotor were good you'd be sweet....ratings are only ratings after all Learned that with my CC240....

                    Pity bout the crap weather...even in the deep south of the city here its crap

                    Comment

                    • G Doggett
                      Senior Member
                      • Apr 2007
                      • 446

                      #70
                      Originally posted by tylerm
                      How did the boat itself handle Graham?
                      Hi Tyler
                      Handling wasn't too bad, went like a cut cat in a straight line but bounced a bit in the turns.
                      Mind you I was running in the quarry so had to make fairly tight turns at half throttle, might be OK on the oval at full speed.
                      Will bring her down to Hakanoa next Sunday.
                      Graham.

                      Comment

                      • Corey
                        Junior Member
                        • Dec 2009
                        • 11

                        #71
                        Thats a sweet looking boat!!! Can you tell me what kind of hull it is and where I can locate one? Also, I can't see the nose very clear, does it have the nose of a fountain aswell? Thanks, new guy here

                        Comment

                        • SJFE
                          Fast Electric Addict!
                          • Apr 2007
                          • 4735

                          #72
                          Grahm did you have any torque role issues on launch?

                          Comment

                          • Corey
                            Junior Member
                            • Dec 2009
                            • 11

                            #73
                            Sorry for the wasted post, if I would have read a little closer, I would have seen where te hull came from. Hard to make out if the nose is like a Fountain or not! "atleast for me". Very nice looking boat tho

                            Comment

                            Working...