Skippies and Kiwis

[Xzessperated]

well big question
thinking of painting the cat the same colour i did my tunnel canopy
so it will be two tone,black and blue,think it will match ???
here is a pic off the colour (looks better in person)

Looking good ozzie. Only you can decide what colors you want it. I like that blue but I also like the way the Genesis cat is painted too.

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=11240&Product_Name=Genesis_Offshore_Brushless_RC_Twin_Hull_%281045mm%29

[andym]

It is the Bridgestone Corporation, keep your grubby little screw. I would not accept anything from some one so un Australian as to ridicule the great game of Aussie rules. Why don't you move up to PoofterLand and screw Ozzie, pair of wanking GAYS. And yes I am pissed off

[Xzessperated]

Look out everyone

[ozzie-crawl]

and here I was thinkingPINK was your favorite colour ....

i do link pink pussy but would never paint my boat pink. i will leave that to
the "model crafts master" as thats what he thinks he is
not everyone can make a boat go from 2kg rtr to 6kg bare hull

[ozzie-crawl]

Looking good ozzie. Only you can decide what colors you want it. I like that blue but I also like the way the Genesis cat is painted too.

its me painting were talking about,dont think i can get a single colour done rite yet alone multiples

[ozzie-crawl]

It is the Bridgestone Corporation, keep your grubby little screw. I would not accept anything from some one so un Australian as to ridicule the great game of Aussie rules. Why don't you move up to PoofterLand and screw Ozzie, pair of wanking GAYS. And yes I am pissed off

Aaaaaw come on andy you know its not the game it used to be.
bring back the biff

[Xzessperated]

its me painting were talking about,dont think i can get a single colour done rite yet alone multiples

I am the same ozzie. Why not just leave it black with a few stickers?

[ozzie-crawl]

I am the same ozzie. Why not just leave it black with a few stickers?

yea mite do,but i really like that blue

[Xzessperated]

yea mite do,but i really like that blue

Well use the blue. It has to please you and not us. I like the blue. If ya mess the edge up you can use some white pinstripe tape to hide it.

Andy hates my football boats but he loves me Well ok just not at the moment.

[drwayne]

It is the Bridgestone Corporation, keep your grubby little screw. I would not accept anything from some one so un Australian as to ridicule the great game of Aussie rules. Why don't you move up to PoofterLand and screw Ozzie, pair of wanking GAYS. And yes I am pissed off

ah, my unlearned colleague.. lego is the correct answer.
They produce more (model) tyres than any other manufacturer of ( any type ) tyres globally.

No, not a poofta, and ta for the suggest but I'll leave Queersland to those native to the location.
Ozzie apparently aint native there, so he also skims past that abuse.

Sounds like your flavored brigade ( of lycra wearing, drug abusing, wife swapping, schoolgirl humping prima donnas ) has ended up face first in the muck with the opposition bunch of arsestabbers groping their shorts.

You sure enjoy strange sports

and I thought you were a decent bloke....

[Xzessperated]

Douggie

I forgot to mention that my Turnigy 180 esc was tested again today in my DF 33 on 4s and my andym special M645 prop. 2 trips to the lake now and still going strong. Mine is the new one with the 2 tabs to bolt it down if needed.

[drwayne]

its me painting were talking about,dont think i can get a single colour done rite yet alone multiples

My favorite declaration after I fup a paint job..I meant it to look like that !

Electrons are easy to play with.. it's the bigger things that can get me flustered.

[Xzessperated]

Ozzie

Just wondering which motor you would go with here. It is for my OB leg and it has to have the 1/8th shaft. I think you will say go for the L motor. The Mercury canopy will not fit on with the L motor but it would cool it better out in the open anyway.

Both Feigao

540 12S 3,180 RPM/Volt 1/8" Shaft

540 9L 2,887 RPM / Volt 1/8" Shaft

I want to run on 3s and I was thinking of this esc ...

http://www.hobbycity.com/hobbycity/store/uh_viewitem.asp?idproduct=8946

Do you see any problems if I keep prop size 35 mm or below?

[ozzie-crawl]

yea defenatly the L size would be the go,cant see why the 120a turnigy wouldnt hold up. cant see that setup pulling more than 60-70 amps max

[drwayne]

I want to run on 3s and I was thinking of this esc ...

http://www.hobbycity.com/hobbycity/store/uh_viewitem.asp?idproduct=8946

Do you see any problems if I keep prop size 35 mm or below?

Why run water cooling just for esc.. lots of extra plumbing ...?
I use these on 2 and 3s jetsprint toys up to 70A cont.
built for 4yr old niece... now the boss of pond rescues !

works cool !

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=10331&Product_Name=Turnigy__Brushless_ESC_85A_w/_5A_SBEC

if you do buy, do not bypass the on/off switch by soldering pins together..will create a burning odour on connect !

W