PDA

View Full Version : Black Jack 26, over 47MPH


LiPo Power
08-07-2009, 09:39 PM
This is it! After many changes, testing, burning ESC, reading and applying ideas in to my boat I was able to get this boat to over 47MPH!!!
Thank you, Thank You Very Much!!!!!:banana:
http://www.youtube.com/watch?v=75CQ8dM7g-Y
Rumdog
08-07-2009, 09:47 PM
That is one fast BJ 26 bro! good job!Have you tried to rip a wide full speed turn yet?
LiPo Power
08-07-2009, 09:52 PM
That is one fast BJ 26 bro! good job!Have you tried to rip a wide full speed turn yet?

Turn fast speed with BJ :doh:
I will try next time.
Rumdog
08-07-2009, 09:56 PM
Make sure to get some footage! Has it tried to blow over yet?
LiPo Power
08-07-2009, 10:01 PM
This boat is nothing but LET ME FLY with this speed... :olleyes:
NitroVal
08-08-2009, 03:21 AM
That thing is bookin it....
HappyOne
08-08-2009, 09:08 AM
It's like a totally new boat:smile:
Doby
08-08-2009, 09:15 AM
Its the pond that makes it fast....................
LiPo Power
08-08-2009, 04:32 PM
Yes it's the pond, it is the new reborn boat, yes it's new electronics but NO, NO sharp turns full speed. What do I do to turn fast please?
Thanks
Robert
PS
Doby
You have some e-mails to respond please... :olleyes:
Fluid
08-08-2009, 04:36 PM
...What do I do to turn fast please?

Buy a MeanMachine. The hull design of the BJ does not maximize turning potential, and you will never be able to match the turning ability of a cat like the MM. But congtratulations on achieving that SAW speed, impressive.



.
alvinsmith75
08-08-2009, 06:27 PM
Try a 537/3 octura prop and you should see oner 50mph easy with your setup. Just watch your temps and runtime.
LiPo Power
08-08-2009, 07:44 PM
I am sure this hull is at it's capable limits. I will keep it this way and maybe do few runs to try new props for sure. I will try 537/3 and see, will post video.
As for now I will go crazy in turns with my delta force 33.
Thanks guys.
Robert
LiPo Power
08-31-2009, 05:52 PM
Another test with my BJ-26 with lighter batteries. 2 x Zippys 7.4v, 20C at 14.8V, Hydra 240LV, feigao 8xl, x642 prop.
This time 50mph!!!!
This is cool, only problem is no sharp turns. 1/2 thtottle on turns and on flat water only for me for now. I will continue to test this boat out. I think at this moment my BJ is at it's most.
Robert
Doby
08-31-2009, 07:14 PM
Only on my water would you get those speeds!
nate
08-31-2009, 08:30 PM
Another test with my BJ-26 with lighter batteries. 2 x Zippys 7.4v, 20C at 14.8V, Hydra 240LV, feigao 8xl, x642 prop.
This time 50mph!!!!
This is cool, only problem is no sharp turns. 1/2 thtottle on turns and on flat water only for me for now. I will continue to test this boat out. I think at this moment my BJ is at it's most.
Robert

This is one clean setup, and very fast!

But, as Fluid is inquiring.... SAW is the only thing the BJ26 can do... and Im curious as to how much faster this hull will go... maybe 8mph more.. then small chops will cause this boat to blow over im sure.

Pro boat should have designed this boat 2" longer and 1 -1/2" more in width.
LiPo Power
08-31-2009, 10:05 PM
Thank You, Thank You very much!!!!
If Doby was not on this real boat of his I would have video of this most likely....
:tt2:
6S HYDRO
09-01-2009, 01:58 AM
Ive done mid fifties w/ total stock setup on a 6s saw pass