PDA

View Full Version : Delta 29 copy third run (P220 and X642)



FastVee
08-01-2009, 04:58 PM
This time we tested Prather 220 and Octura X642.

Only motor was a bit warm, esc and lipos cooler then hand.

will try the x645 next:buttrock:

another long vid :doh: or :popcorn2:

http://www.youtube.com/watch?v=5rgPsisGJjQ and new one http://www.youtube.com/watch?v=_wguZ9He_EU


Sorry about us talking in the backround,it is difficult to say nothing for 10 minutes...

ksm2001
08-01-2009, 06:45 PM
Very nice runs, I'm impressed with how its running with the 642. I like how it handles without turn fins, I'll have to try without next time out. Cool.

Ken
:canada:

domwilson
08-01-2009, 06:47 PM
Looks good. Rides nice. Are you getting alot of water in the hull?

FastVee
08-01-2009, 06:55 PM
Thanks guys!

This hull deserves so much more power...I could keep wot on corners and it wont flip!


No water inside .(I keep one tissue paper folded against transom and after 10 minutes od driving it is sometimes damp)

. I guess that little bit of water gets in from hatch opening when the hatch is removed to check temps.

The worst leak that my sv had was from stuffing tube, after I found where it came from I installed 5mm piece of fuel tube on prop shaft (between drive dog and strut) and no water gets in from there anymore.:thumbup: (I did that to this too)

domwilson
08-01-2009, 07:35 PM
Do I hear a Feigao 8XL, 9XL or a Neu in the future?
I wonder how a UL-1 motor would work in there?
Here's a inexpensive ESC that would work and just needs waterproofing/cooling added... http://www.himodel.com/electric/HiModel_GX_Seires_200A_4-8S_Electric_Speed_Controller_W_BEC_Type_GX-200A-BEC.html

ksm2001
08-01-2009, 08:04 PM
Do I hear a Feigao 8XL, 9XL or a Neu in the future?
I wonder how a UL-1 motor would work in there?
Here's a inexpensive ESC that would work and just needs waterproofing/cooling added... http://www.himodel.com/electric/HiModel_GX_Seires_200A_4-8S_Electric_Speed_Controller_W_BEC_Type_GX-200A-BEC.html

Agree :rockon2: the Himodel works great water cooled with the 8xl, and will make it fly,I know it will put a :biggrin: on your face from ear to ear.

But still have to say I'm impressed with the SV system, runs better than I thought it would, just have to say again Good Job Pate.

Ken
:canada:

FastVee
08-02-2009, 07:23 AM
That esc look great for the price! -any idea is that company reliable? Will the OSE cooling plate fit? Another option is that 180/280A marine HC esc.(89$)

- And yes, I am thinking of 8XL, but I also could keep this hull like it is and get the 33 or 39 version for my next project and add 8/9XL on it :w00t: -Cant build it soon, but for next summer it would be ready... Or maybe the 25" hull and put SV electronics there, then I could get the 8xl on this...

This thing runs so smooth! -I have to try racing it against my friends(Matti1983 here OSE forums) SV. The SV may be a bit faster on the first straight, but after the first corner (and SV flips) this thing is going to finish first!:banana:

This is fast when looking the vids but while driving it it some how looks so slow...must be because it handles so perfectly.

I wonder will the 5000mAh 30/40C lipos I ordered with 10awg wire and 5.5mm bullets give this more speed:confused1: -well, attleast they can be used on my next build...

ksm2001
08-02-2009, 09:11 AM
I have 2 Himodel 200amp esc's one in the DF29 and one in the Xzess2 Rigger with the 7xl and both run great, both are water cooled one with Steve's plate that he sells and fits perfect.I had no problems with ordering from Himodel. Also have a Turnigy water cooled 180, good reviews also and no need to mess with cooling it. Himodel sells the same under the Seaking label.
Here is a thread.

http://forums.offshoreelectrics.com/showthread.php?t=5924

Ken
:canada:

FastVee
08-02-2009, 11:51 AM
Thanks 4 the link Ken.

Sadly the water cooled ones are out of stock everywhere :doh:

except the 60A model.

Any Idea of that 60A(120A burst) esc? cheap and widely available on bay.
Somehow the himodel site claims it is 380A burst:blah:

If the 8xl is rated 80A(If I remember correctly) this could be enough???

What do you think? (the 45A SV esc is working fine so 60/120A should be much better???)

Or maybe that one what Domwilson linked is the best and just add the OSE plate on it?

domwilson
08-02-2009, 12:02 PM
If you get the himodel, get the cooling plate from here as well as the dp270 epoxy and thermal paste to waterproof it.

sailr
08-02-2009, 02:36 PM
I will have ten of the 180A Seakings (same as turnigy) in a week or two direct from the factory. These will be upgraded . Seems there was a problem with them with some sort of 'short'. My shipment has been delayed to correct the problem. Sooo, these will be better! Price will be $125 shipped in the U.S. Yeah, I know, They're $90 bucks + shipping at HobbyKing ... BUT... they don't have them. CHEAP is only good if you can get it! I had to pay the same price plus shipping. I'm entitled to make a few bucks for my trouble to help you guys out. So if you want one, PM me. I'll start a waiting list.


Thanks 4 the link Ken.

Sadly the water cooled ones are out of stock everywhere :doh:

except the 60A model.

Any Idea of that 60A(120A burst) esc? cheap and widely available on bay.
Somehow the himodel site claims it is 380A burst:blah:

If the 8xl is rated 80A(If I remember correctly) this could be enough???

What do you think? (the 45A SV esc is working fine so 60/120A should be much better???)

Or maybe that one what Domwilson linked is the best and just add the OSE plate on it?

FastVee
08-04-2009, 11:28 AM
Latest vid, since nothing changed(except the strut angle is 1mm up) ,I did not made a new thread.


edit. I did it anyway, thanks to private messages.

"delta 4th run -jump! (http://forums.offshoreelectrics.com/showthread.php?t=9528) "

Jesse J
08-04-2009, 11:48 AM
Wow, I think you set the bar another couple notches higher! that looks like a blast - and what beautiful scenery as well.

Great job!!

FastVee
08-04-2009, 12:14 PM
Thanks, I did made a new thread after all, thanks to some feedback from private messages :popcorn2:

so the vid is available here "delta 4th run -jump! (http://forums.offshoreelectrics.com/showthread.php?t=9528)"