FS: Brushless 1/12 Pro Boat Miss Bud

[Diegoboy]

SOLD...
Thank you Chonburi for the excellent offer!

Thank you to everyone else that submitted their offer too!
__________________________________________________ ________________________


This is my 1/12 scale Pro Boat Miss Budweiser that runs a consistent 37.2 MPH.

Hull: "flex shaft" design, bought brand new from the LHS. This hull has never had that messy nitro stuff near it.

Measurements: Length 26 inches (660mm). Beam 8.3 inches (210mm)

Motor: Ammo Brushless 36-50-2300kv. The motor was bought brand new from OSE strictly for this boat.

ESC: SV27 ESC. Pulled from my SV27 which was run only a handful of times. The ESC comes with the stock cooling plates.

Hardware: Stock Pro Boat 1/12 hardware. All the hardware was bought brand new from the LHS for this boat.

Turn Fin: Grimracer Turn fin. Bought brand new from the LHS for this boat.

Prop: Octura X642 Bal & Sharp. Bought brand new from OSE for this boat.

Servo: Futaba s3003. The servo came new with my FM Radio.

Receiver: Not included.

Batteries: Optional part. Matched EP4200s 2x 6-cells
Pack1 cells labeled:
SEC 0448 AV 1.233 AR 1.5 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0449 AV 1.233 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0449 AV 1.232 AR 1.7 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0449 AV 1.233 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0448 AV 1.233 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0449 AV 1.232 AR 1.7 DIS 35 CHG 6.0 CTF .90 DET 5000

Pack2 cells labeled:
SEC 0440 AV 1.234 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0440 AV 1.235 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0440 AV 1.234 AR 1.5 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0440 AV 1.235 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0441 AV 1.235 AR 1.5 DIS 35 CHG 6.0 CTF .90 DET 5000
SEC 0440 AV 1.235 AR 1.6 DIS 35 CHG 6.0 CTF .90 DET 5000

Condition: Minor scratches on the bottom of the left sponson. otherwise she is in excellent condition.

Price: Please PM me with offers.

Video (http://www.youtube.com/watch?v=qbJrlTEgMLY) <-- For those who haven't seen her run.


http://www.diegoboy.com/misc/100_1317-sm.jpg (http://www.diegoboy.com/misc/100_1317.jpg)

http://www.diegoboy.com/misc/100_1318-sm.jpg (http://www.diegoboy.com/misc/100_1318.jpg)

http://www.diegoboy.com/misc/100_1319-sm.jpg (http://www.diegoboy.com/misc/100_1319.jpg)

http://www.diegoboy.com/misc/100_1320-sm.jpg (http://www.diegoboy.com/misc/100_1320.jpg)

[Diegoboy]

http://www.diegoboy.com/misc/100_1321-sm.jpg (http://www.diegoboy.com/misc/100_1321.jpg)

http://www.diegoboy.com/misc/100_1322-sm.jpg (http://www.diegoboy.com/misc/100_1322.jpg)

http://www.diegoboy.com/misc/100_1323-sm.jpg (http://www.diegoboy.com/misc/100_1323.jpg)

http://www.diegoboy.com/misc/100_1324-sm.jpg (http://www.diegoboy.com/misc/100_1324.jpg)

[Diegoboy]

One more Pic
http://www.diegoboy.com/misc/100_1325-sm.jpg (http://www.diegoboy.com/misc/100_1325.jpg)

[Jeepers]

how come you selling it?

[Tunda]

how much do you want?..................

[Diegoboy]

how come you selling it?

I want to go with a bigger scale than 1/12.


how much do you want?..................

That's tough for me.
A Miss Bud, new, costs $299.99
Used ones are less than that.
Mine is lightly used, but still used.
Every run she had was posted about here. Maybe 5 runs total. (only once did she have a full run where the batteries gave up.)
Mine is not Nitro (stock) but it is FASTER than stock by 7.2 MPH.
Stock comes with a radio. Mine doesn't.

It's hard for me to let her go, but she can't stay because I can't afford to start a new project from $0. :(

No insults on offers. For example, I get an offer of $40 which won't even buy the motor, I won't be offended. I hope to at least get $200 for her without the batteries. Batts cost me over $150 at the LHS and only run the 5 or so times in this boat.

Thanks,
Danny

[Tunda]

can you post a pic of ware the batts go? thanks...........

[Diegoboy]

Sure... I'll take one tonight and post it for you. :)

[Tunda]

ware dose it go anyway..............

[Diegoboy]

ware dose it go anyway..............
One in the nose where the gas tank is supposed to be.
The other one right in front of the motor, where the velcro is.
Both packs are in a "brick config"

[Diegoboy]

Here are the pics of the battery placement.

1 battery
http://www.diegoboy.com/misc/100_1423-sm.jpg (http://www.diegoboy.com/misc/100_1423.jpg)


Both batteries
http://www.diegoboy.com/misc/100_1424-sm.jpg (http://www.diegoboy.com/misc/100_1424.jpg)

I have recently run it in this config, hatch closes over it with plenty of clearance.
http://www.diegoboy.com/misc/100_1425-sm.jpg (http://www.diegoboy.com/misc/100_1425.jpg)

Or even Doby's config with stick packs would be fine too.
My ESC is in the radio box area instead.

[SJFE]

I wonder if you can section that hull and open more of it up????

[Diegoboy]

Here's a pic during the build process when the SV27 motor was still installed. I thought about cutting that bulkhead on either side to access the room in the sides & sponsons, but I didn't have the heart to cut my baby. Besides, It isn't needed, she runs great just the way she is.
I guess cutting those accesses would lighten her up a bit more, but I wouldn't.



http://www.diegoboy.com/misc/100_1278-sm.jpg (http://www.diegoboy.com/misc/100_1278.jpg)

[Diegoboy]

SOLD...
Thank you Chonburi for the excellent offer!

Thank you to everyone else that submitted their offer too!

[Tunda]

how much did he get it for........

[Diegoboy]

how much did he get it for........
It's still pending. There has been no transfer yet. His offer allows me to keep the motor, esc, & prop for $120 shipped
That helps me a lot on the next build.

[Tunda]

well i wish you told me i would have bought it.............:eek:

[Tunda]

if his funds dont go ill take it........................i have pay pal you can get the funds right now...................................

[Tunda]

any how how did he get it before meeeeeeeeeeeeeeeeeeeeeeeeeee.............

[Diegoboy]

Okay Tunda. If it fails, You're next in line. I truly apologize Tunda, I was waiting for your offer, but it never came. I posted the batt placement pics, then nothing. I thought I saw that you logged on after the batt pics.

Again, I'm sorry! I feel bad now! :(

[Diegoboy]

His payment has been received.

[Tunda]

its ok dude i should have been more on it i guess. I just came back from running my surfer and my friend was showing me how to up load the video so i could post it for you guys well anyway may be next time that was a great deal.I was going to ask you if you wanted to trade for my oval master 29..............

[Diegoboy]

I would have definitely DEFINITELY traded for that Drifter. ;)

[Tunda]

well maybe the next time around......................

[hkusp45]

Drifter?

What Drifter???

[Jeepers]

[QUOTE=Diegoboy;9402]I want to go with a bigger scale than 1/12.

1/10 or 1/8? hydro or mono?

[Diegoboy]

Drifter?

What Drifter???
The White H&M Drifter S he has!!!:D

[Diegoboy]

[quote=Diegoboy;9402]I want to go with a bigger scale than 1/12.

1/10 or 1/8? hydro or mono?
Probably 1/10

[hkusp45]

I musta missed it?!?!

[Tunda]

I didnt say Drifter i said oval master anyway im still waiting on the drifter it should be here tomorow ill post some pic when i have it in my hands:D

[Diegoboy]

I know you didn't say Drifter. I did! lol

[Diegoboy]

She has been stripped of the Motor, ESC, and Prop.
She has been wiped down, and boxed. Ready for shipping tomorrow.

http://www.diegoboy.com/misc/100_1432-sm.jpg (http://www.diegoboy.com/misc/100_1432.jpg)

[SJFE]

What did you sell it as hardware and hull only?

[Diegoboy]

Ya. I did...:eek:

[SJFE]

Yeah I find they go faster like that. Pluss anymore I like to keep the internals anyway. Makes an easer transition into the next hull.

[Diegoboy]

According to the tracking number I provided. She should be delivered sometime tomorrow 7/25/07. :D

[Diegoboy]

Latest from Fedex...

Jul 25, 2007 10:07 AM - On FedEx vehicle for delivery

:D

[Diegoboy]

Jul 25, 2007 11:59 AM - Delivered

[chonburi]

ok i just opened the box and it is nicer than the pix.The pictures dont do this boat justice im probally going to run a neu 1515/1.5d on 12 cells with a prather prop.

[Diegoboy]

I'm glad you like it! Take care of her.:o