Chuck E Cheese
06-21-2009, 05:42 PM
i am looking for someone who has built a delta 26" with a 8xl or 1515 1y. i was getting ready to build one and needed information on the set-up, hoping someone could share. the set-up i want is:
feigao 8xl, cc120, 2x 4s - 2700 - 30c, x440 - 642
or
neu 1515 1y, cc240, 2x 4s - 5000 - 25c, x440-642
i am looking to make this boat run solid 50mph. i was looking for pictures of someone who has a 26" with XL motor. what i need to know is how they set-up the motor / battery and COG. i am using speedmaster strut/rudder. info like the cog, distance from front motor endbell to transom, battery and esc placement. i wasnt going to install rails but could if necessary.
1) batteries in the center? front or rear or sides (5000mah 4 cells hard to fit on the sides)
2) distance to the front of the motor
3) cog % (25-35?)
4) motor - esc - prop combo
pictures would be greatly appreciated....
please no set-up other than XL or 1515 4 cells, i already have one that runs 8l on 3 cells and a SV/ammo set-up and those boats work great. even though speed is similar i have these motors and esc's and want to put them in this hull...
feigao 8xl, cc120, 2x 4s - 2700 - 30c, x440 - 642
or
neu 1515 1y, cc240, 2x 4s - 5000 - 25c, x440-642
i am looking to make this boat run solid 50mph. i was looking for pictures of someone who has a 26" with XL motor. what i need to know is how they set-up the motor / battery and COG. i am using speedmaster strut/rudder. info like the cog, distance from front motor endbell to transom, battery and esc placement. i wasnt going to install rails but could if necessary.
1) batteries in the center? front or rear or sides (5000mah 4 cells hard to fit on the sides)
2) distance to the front of the motor
3) cog % (25-35?)
4) motor - esc - prop combo
pictures would be greatly appreciated....
please no set-up other than XL or 1515 4 cells, i already have one that runs 8l on 3 cells and a SV/ammo set-up and those boats work great. even though speed is similar i have these motors and esc's and want to put them in this hull...