Miss Attitude 80mph run

[Gary]

Miss Attitude Hydro. 1521 1.5d,hydra 240,22 volts,m645 prop.My Son {Mr. potty mouth} LOL was useng our new flip camera so its not the best plus he missed a great blow over. Please remember this a GPS speed only and only reflects my boat and how i measure speed. http://www.youtube.com/watch?v=YvLAGyd3GuU

[Rumdog]

link is no good

[HOTWATER]

Wow! Very fast boat!! Yeah...I wish I could have seen the air that thing caught during the flip! How about another try at filming it...and can you make sure you flip it again just the same way!!.....LOL!! J/K!!

Killer boat!

[Gary]

I have battled this boat for 1 month and finally got the sponsons angle correct to stay on the water . It will go 90 mph with a 1527 motor for sure. I have had some of the most spectacular crashes i have ever seen and that last run the batts warmed up so she was headed for 82-84 thats as fast as shes gone.

[Ub Hauled]

Gary, she looks great.

[Punisher 67]

Nice run Gary , Geez that bad boy is smoken

[Flying Scotsman]

That is fast and a neat looking pond.

Douggie

[bigpapa]

GARY, THATS ONE FAST MOFO !!!!!!!!!!


:buttrock::bowdown::buttrock:

[line6]

Nice run.That thing is moving:rockon2:

[bustitup]

Thats the kind of stuff that hooks you in the gills in this sport

[HOTWATER]

NITRO GUYS (I used to be among them for a bunch of years...) EAT YOUR HEARTS OUT!!! Don't worry...There's plenty of room here for Jumpers!!! LOL!:banana:

[Gary]

I will tell you what.......i could not have done it with out all your guys help with all my crazy problem questions. Thanks for everything. This boat was a royal pile of %$&* as far as performance when i first got it and than i crashed it real hard into a submerged log. I had to fiberglass the whole front end because i could not for the life of me find another hull. But i got it right this time. I was amazed it made those runs perfect like that.I played it 20 times already. This is what keeps me going in a tough hobby like this. The next video is going to be a 90 mph run.On these runs you saw , I made a total of 8 passes , the boat kept filling up with water for some reason . There has to be a crack im not seeing where water pushes in . My scale showed 1/4 pound of water on every 3 passes. Really strange. .............Again thanks for the complements and help.

[Gary]

Well i kept her dry today but it only went 82mph:banana: . Looks like 90 is going to be alot of work.I think i will try alittle more cup in prop.I will keep you posted.

[Gary]

WOOOHOOO.........Im getting there.....85.3 today. I was alone so no vid so next run on Sunday I will drag my kid out with me.

[Gary]

Again at lake alone at 6 am .....87.0 mph and still as stable as can be. This hull is amazing and i think it will pass 90mph . Im almost there.

[Ub Hauled]

Gary, is this what you are aiming for?

P Sport Hydro - Brian Buaas - 11-07 - 93.16mph

oh wait, I just saw that you are using 22.2 volts... Brian was on 14.8.
Nonetheless, that is an awesome speed!

[Gary]

I will tell you what Ubhauled....I have no idea how these guys go so fast on 14 volts. I have pruven to myself time and time again that the faster i spin my prop ......the faster the damn thing goes. Even when the combination was put togather from pros on line it would not ever get close to the speeds im at now.I will have to go to an event and see how they are doing it.

[Brushless55]

That is aesome! :bowdown:

[Ub Hauled]

I will tell you what Ubhauled....I have no idea how these guys go so fast on 14 volts. I have pruven to myself time and time again that the faster i spin my prop ......the faster the damn thing goes. Even when the combination was put togather from pros on line it would not ever get close to the speeds im at now.I will have to go to an event and see how they are doing it.

All boils down to one word... prop.

[Gary]

I know but when i go bigger it just pulls the motor down. Even now if i put to much cup in the prop i am useing it will do the same thing , overload the engine. I have modded 10 M645 props to get where i am today.

[Ub Hauled]

I cannot remember what motor Brian was using, I think maybe a 1521/1D or something like that. One thing is for sure, it was for a couple of passes at a time... if you run more then that it would overheat too much.

[Gary]

Hey ....how bout a 1527 1D ............... WOOOOHOOOO now where talkin rpm!!!!!!!!!!!!!!!!!!!!

[Gary]

It seems to be 1 mph at a time but i cracked 88 mph late today. I have a vid if it but cant seem to get it loaded. I will try again tonight.