Wtb mini delta force hydro

[6S HYDRO]

MAN IVE BEEN LOOKING FOR ONE OF THESE FOR A LONG TIME. LET ONE SLIP THRU MY SIGHTS FOR 40.00 ( GOOD LUCK DARIN ) PLEASE IF ANYONE HAS ONE LET ME KNOW NEW OR USED.:beerchug:

[Jesse J]

I've got one. I bought it here about a month ago for my nephew, and then we decided he needed a mono. I have run it a couple times - pretty quick and stable. It has microcat hardware and I can let it go with the Feigao 380 7S in it now. It runs on 2S and could be in the low 30s. I can post pics in a little while.

[Jesse J]

Here is the thread to the one I am talking about.
http://forums.offshoreelectrics.com/showthread.php?t=7945&highlight=df+mini+hydro

Since these pics I have re-attached the motor mount and made it adjustable. Replaced the cable, cause the one that I bought extra was too short and unusable. I have a 27mm prop that goes with it, cuz the 29mm made too much torque roll. I added a micro high torque servo (brand new) that hasn't gotten wet yet. I siliconed it in and gooped it up trying to make it as water resistant as possible.

Would let it go for $130 shipped and insured. will post pics within the hour.

[Jesse J]

Here is motor:
feigao 380 S:380 7S 5,639 RPM/Volt 1/8" Shaft, I also include motor coupler in price. All you add are radio and batts.

$100 for boat, hardware and servo - no motor/coupler.

[Jesse J]

This is the ESC (first time put to use - ran twice):
http://www.himodel.com/electric/Seaking-35A_Waterproof_Brushless_ESC_for_Boats_W_water-cooling_system.html

Motor is first time too (ran twice):
http://www.offshoreelectrics.com/proddetail.php?prod=fei-380-S&cat=116
Can add water cooling jacket for $10

Whip antenna, and ESC add $40.

If you want the two Rhino packs (I ran them in series for longer run time) add $15
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=7310&Product_Name=Rhino_1250mAh_2S_7.4v_20C_Lipoly_Pack

Total RTR (just add radio) for $195 shipped with insurance in US.

[Jesse J]

photos

[Jesse J]

more photos. I have high resolution ones I can email if necessary

[6S HYDRO]

I was looking more for the hull only. i will think about the hull and hardware w/o motor. but was looking to spend more around the 60-80 dollar range. thanks for the super quik response though:thumbup:

[Jesse J]

The hull hardware does have a new minicat bearing that was not included in the original purchase, so the $100 is a better deal than I originally intended, but if it will work for you then all the better.

[6S HYDRO]

sorry just noticed the hatch, cant pay more than 60.00 for this one, since it is used and all cracked up.:sorry:

[6S HYDRO]

If anybody else has one or even the full size version hull only, let me know

[bustitup]

J
just give it to him...he needs it more than you do

[thundercat]

interested in a mint mini cat racing hydro??

[Jesse J]

sorry just noticed the hatch, cant pay more than 60.00 for this one, since it is used and all cracked up.:sorry:

I would go $60 plus shipping for hull/hardware, w/o servo or antenna. The hull is in great shape, no cracks or blemishes. Its been slightly scuffed with fine sandpaper for performance and the graphics are also in great shape.

I wouldn't describe this as "all cracked up" even if I were buying it from someone else. The hatch does have some cracks in the exterior gel, but is water tight (I have noticed this is pretty common for these hatches).

J

[6S HYDRO]

sorry i just meant the hatch is all cracked up, and it will be nearly impossible to find a new hatch. so id have to re-finish and repaint.:doh:

[Jesse J]

So... did you mean you were interested for $60?

[6S HYDRO]

Let me think about it for a few

[Jesse J]

you are first in line, and take your time, want you to be happy. If you want more pics, let me know, can email hi res ones so you can see all the detail.

[6S HYDRO]

Very kind, may i say i love your signature- so very true in all aspects