Darin Jordan
07-02-2007, 09:07 PM
Less than a year old RC-Hydros V90-614/Opto ESC (Victory 90Amp, No BEC, Water cooled)
Brushed Motor, 7-15Volt, 90Amp, Opto-Isolated, Water cooled
Comes with Dean's on the battery side and 3.5mm on the motor leads...
I've used this in a 19T rigger for two race weekends... but have switched to an older RC-Hydros esc without water cooling (NONE of these RC-Hydros NEED water cooling anyhow, but it's there if you are so inclined...)... It's in excellent condition... practically brand new...
Best brushed ESCs ever made... Out of production now... Excellent for LSH or other brushed applications up to 14-cells...
Here are the specs from Andy's site:
- V90-614/Opto Features -
Watercooled & Waterproof
6-14 cells or 2S-3S LiPo
1.5" x 2.5" x 0.5" thick (40 x 65mm x 13mm)
Programmable for Pistol-grip or Stick transmitters
Programmable Low-Voltage-Cutoff (LVC) to save your LiPo cells
Programmable PWM to match your motor's inductance best
Weighs only 1.5oz (44g) with wires
6-FET design for very low on-resistance (.0005 ohms!!)
450A surge current, 90A continuous with water cooling
Three-color LED shows OFF, PARTIAL, and FULL POWER settings
All adjustments are done on your transmitter - no pots to fiddle with!
Opto-Isolated to reduce radio interference
No BEC - BECs carry noise directly into your radio
Universal JR-style servo connector (compatible with Futaba, Multiplex, Hitec, and Airtronics Z
12" servo leads allow flexible positioning
Fail-safe powers down on radio signal loss (but doesn't glitch)
Safe-On feature prevents glitching on power-up
12AWG wire for minimum resistance
Recommended for all 6-14 cell racing configurations
Manual available Online
$80.00 shipped in the USA.
PayPal preferred, but Money Order OK as well.
Banzai240@yahoo.com
Brushed Motor, 7-15Volt, 90Amp, Opto-Isolated, Water cooled
Comes with Dean's on the battery side and 3.5mm on the motor leads...
I've used this in a 19T rigger for two race weekends... but have switched to an older RC-Hydros esc without water cooling (NONE of these RC-Hydros NEED water cooling anyhow, but it's there if you are so inclined...)... It's in excellent condition... practically brand new...
Best brushed ESCs ever made... Out of production now... Excellent for LSH or other brushed applications up to 14-cells...
Here are the specs from Andy's site:
- V90-614/Opto Features -
Watercooled & Waterproof
6-14 cells or 2S-3S LiPo
1.5" x 2.5" x 0.5" thick (40 x 65mm x 13mm)
Programmable for Pistol-grip or Stick transmitters
Programmable Low-Voltage-Cutoff (LVC) to save your LiPo cells
Programmable PWM to match your motor's inductance best
Weighs only 1.5oz (44g) with wires
6-FET design for very low on-resistance (.0005 ohms!!)
450A surge current, 90A continuous with water cooling
Three-color LED shows OFF, PARTIAL, and FULL POWER settings
All adjustments are done on your transmitter - no pots to fiddle with!
Opto-Isolated to reduce radio interference
No BEC - BECs carry noise directly into your radio
Universal JR-style servo connector (compatible with Futaba, Multiplex, Hitec, and Airtronics Z
12" servo leads allow flexible positioning
Fail-safe powers down on radio signal loss (but doesn't glitch)
Safe-On feature prevents glitching on power-up
12AWG wire for minimum resistance
Recommended for all 6-14 cell racing configurations
Manual available Online
$80.00 shipped in the USA.
PayPal preferred, but Money Order OK as well.
Banzai240@yahoo.com