PDA

View Full Version : Neu motor request



Diegoboy
05-16-2009, 05:01 PM
Steven,
Will it be possible to carry the Neu 1100 series (http://www.castlespecialprojects.com/csp_1100.html) (380 sizes) motors in the store?
Is anyone else interested in 380 sized Neu motors?

Rumdog
05-17-2009, 01:28 PM
those lil neu's sure look sweet! Not sure if they're worth that much $ though. compare that price to the price of a feigao 380l.

Diegoboy
05-17-2009, 01:30 PM
Apples & Oranges my friend

Rumdog
05-17-2009, 01:42 PM
YES, you are right!!! I just looked again at the continuous and max wattage. holy crap!!! plus a 60,000 max rpm and the max voltage!! those are really sweet!

alvinsmith75
05-17-2009, 04:37 PM
I am interested! Will try in a 16th revo.

Fluid
05-17-2009, 08:24 PM
The 380s are really lacking in torque for boats, even the Neus. Anything over about 19" that doesn't run really loose will have problems, IME at least. The little motors don't have the mass for high wattages either, and will overheat far faster than a 540-sized motor will at similar wattages. They are not equivalent, and trying to force the little motor to do a man's job can be discouraging and expensive.

OTOH for lightweight micro boats they would be wonderful. Just don't let the low cost cloud your judgement.....





./

Diegoboy
05-17-2009, 08:54 PM
My 17.5" hydro is telling me to get one of these Neu's :olleyes:

B-DAWG
05-18-2009, 07:02 PM
Can anyone get me the dimensions on these motors?

tth
05-18-2009, 07:12 PM
Here's the info.

http://www.neumotors.com/Site/1100_series.html (http://www.neumotors.com/Site/1100_series.html)

Punisher 67
05-20-2009, 12:02 PM
He guys check out the rest of the motors also . the 1900 series now comes in variations from a 1902 to a 1925 and the 2200 series now comes in a 2215 , 2217 , 2220 , 2225 , and the 2230

more choices , Steves really stepped up to the plate with these...........:banana:

Brushless55
07-15-2009, 11:29 PM
I am interested! Will try in a 16th revo.


Sounds like a good idea!
I my give one a try in my Mini Slash

rcboatfan
07-16-2009, 04:14 PM
Sounds like a good idea!
I my give one a try in my Mini Slash

are you on the traxxas fourm?

rcboatfan
07-16-2009, 04:14 PM
i would def get one of these small neus if i built a small boat!!!!

txboatpilot
07-16-2009, 05:44 PM
I had a Micro Drifter Cat with a Neu 1112/1Y (3500kv) and ran it on 2x 3s 1500mah 25C packs in parallel (for 3s/3000mah total) with a CC barracuda 80 esc and x435 prop.. It was one FAST little boat, lots of fun,, you could run on/off throttle for over 5 min. and nothing was over 95 deg.. I really wish I had not sold that one! LOL

I love these 1100 motors for micro boats,, my Micro Drifter would literally jump right out of the water from a stand still.. If I had to guess, I would est. top speed at 35-40mph.. I had to have perfect calm water to make full throttle passes..

Here are a few pictures..

Steven Vaccaro
07-16-2009, 07:11 PM
The price keeps me from stocking them. I can special order them if anyone needed them.