PDA

View Full Version : What Type of Boat Setup is a Feigao 10xl used in?



crrcboatz
04-20-2009, 02:08 PM
kv of 1760 or so I think. input appreciated.

Curt

Flying Scotsman
04-20-2009, 03:42 PM
Curt, love you mate. impossible to answer correctly without hull type, length and power. Hull first then the other bits

Douggie

Gerwin Brommer
04-20-2009, 04:07 PM
40 " cats
mono's around 35 "

5S or 6S lipo

That's where I would plant a 10XL

D. Newland
04-20-2009, 04:11 PM
29" to 33" mono. X645/2, X447/2 on 4S. Probably around 80 amp average.

The 10XL is a little low in Kv to sprint race and compete on 4S, but it's a terrific sport motor.

It CAN compete on 4S in an Offshore 4 min heat because amp draw has to be limited to the figures I posted above.

Flying Scotsman
04-20-2009, 04:23 PM
40 " cats
mono's around 35 "

5S or 6S lipo

That's where I would plant a 10XL

Gerwin a 40" cat :confused2: David I agree for a mono

Douggie

crrcboatz
04-20-2009, 04:33 PM
He this helps. Just general ideas where you have seen them used in previous applications. Perimeters are wide open so all options can be considered. My thought also that 4s one is probably looking at sport but that is ok too.

FS I too am surprised at the 40 inch cat thing unless he meant possibly twins.

Ub Hauled
04-20-2009, 05:34 PM
I guess they think a bit different in Holland
;)