Nylon Washers

[domwilson]

Does anyone know where to get nylon washers that fit between the drive dog and strut on the propeller shaft?

Thanx...

[longballlumber]

You should be able to get nylon washer with an 1/8" or 3/16" ID at your local hardware store, but I have got to ask why you would want to put one in there.

Typically (with a flex shaft) you simply leave a gap between the drive dog and the strut face.

[domwilson]

You should be able to get nylon washer with an 1/8" or 3/16" ID at your local hardware store, but I have got to ask why you would want to put one in there.

Typically (with a flex shaft) you simply leave a gap between the drive dog and the strut face.

Thanx. I already tried a few hardware stores. No luck. They are actually for another project I'm working on.

[longballlumber]

Ahhhhhhh I see... I have always had good luck with McMaster Carr, but your buying in quantites.

http://www.mcmaster.com/#nylon-flat-washers/=1h18tc

[Doby]

Wilson, You are alive,,,,excellent.... Let me know the sizes you need, I might be able to liberate some from work!

[domwilson]

Wilson, You are alive,,,,excellent.... Let me know the sizes you need, I might be able to liberate some from work!

Yep...I'm alive. I survived pneumonia and doing ok. Still tryin' to get over broke-itis. Thanx Doby for asking. I'm looking for a few sizes with 1/8" I.D. and 3/16" I.D. and an outer I.D. of 1/4" to 5/8" O.D. Can ya help me me?:bowdown:

[Doby]

I'll check tomorrow when I'm at the office.