PDA

View Full Version : ricoraceing p-hydro



mike martin
04-12-2009, 02:12 PM
Ran my new rico p-hydro today first run slight chop on the water boat was rock solid around 70mph initial set up was good so I proped up second run around 80mpg temps were good but had a small leek on cooler so had to stop and bring it home to fix leek looks like she gona be a keeper I realy built it for oval but saws is next week so I have to see what it does on the strait line first.

teach
04-12-2009, 02:39 PM
Awsome. Have fun at the SAWs!

Doug Smock
04-13-2009, 09:05 PM
It looks good Mike, I like it!!!!

Save something for Sunday, I like to watch you work!! LOL

See ya at Blue Lake!
Doug

mike martin
04-24-2009, 10:04 PM
Well ran it at saws made solid passes of 88mph with p- setup had a Q saws motor was hopping to get over 100 but motor threw the magnets in the first 200' so I,ll have to wait till next time.

mobychev
04-28-2009, 09:11 PM
Hi Mike
thats a very impressive speed :thumbup1:
care to share your setup?? Motor /Lipos etc
Thanks
Graham

Meniscus
04-29-2009, 12:46 PM
Hi Mike
thats a very impressive speed :thumbup1:
care to share your setup?? Motor /Lipos etc
Thanks
Graham

LOL, I'm mainly interested in where you put the batteries! :w00t: :tongue_smilie:

mike martin
04-29-2009, 08:51 PM
Hi Mike
thats a very impressive speed :thumbup1:
care to share your setup?? Motor /Lipos etc
Thanks
Graham

motor is a neu 1521 .5y a 40-160 speed controler batteries poly RC 4s 2p 30c5000ma prop if I remember was ABC 2018

mike martin
04-29-2009, 08:55 PM
LOL, I'm mainly interested in where you put the batteries! :w00t: :tongue_smilie:

batteries go in front of the speed controler 4s2p there is plenty of room. bad picture

sailr
05-01-2009, 09:30 AM
Dang Mike! That is one sharp lookin rigger! Too bad about the magnets! Send 'er back to Steve Neu, I'm sure he'll make it right.

sailr
05-01-2009, 09:33 AM
What's the KV on the .5Y? I don't see it on the chart.

sailr
05-01-2009, 09:34 AM
I hate to be dumb, but what is a 40-160 ESC?

Doby
05-01-2009, 10:05 AM
It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

Doby
05-01-2009, 10:08 AM
Try this

http://www.schulze-elektronik-gmbh.de/index_uk.htm

sailr
05-01-2009, 10:34 AM
Aha! The "40" threw me! Haha.

It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

sailr
05-01-2009, 10:36 AM
Yoohoo! Over $600! You be cryin if you smoke one of those!


It is and probably will still be the mother of all speed controls, made by Schultz in Germany

40V and 160 Amps.

ryan_t888
05-01-2009, 11:47 AM
.5Y would be approx. 3100kv if 1Y is 1577

Ryan

mike martin
05-01-2009, 05:03 PM
.5Y would be approx. 3100kv if 1Y is 1577

Ryan

yes it is 3100 kv

Steven Vaccaro
05-02-2009, 06:20 AM
Ran my new rico p-hydro today first run slight chop on the water boat was rock solid around 70mph initial set up was good so I proped up second run around 80mpg temps were good but had a small leek on cooler so had to stop and bring it home to fix leek looks like she gona be a keeper I realy built it for oval but saws is next week so I have to see what it does on the strait line first.


Mike is that the 42" rigger?

mike martin
05-02-2009, 09:40 PM
Mike is that the 42" rigger?

no its just under 34" for p-hydro. we have a 39" as well me and Ken Hanes have been running at saws for s and t hydro

ryan_t888
05-02-2009, 11:15 PM
What is the All Up Weight. That is RTR with Lipo's

Ryan

Brushless55
01-07-2010, 12:33 PM
Nice looking rigger!