MHZ New Mystic C5000

[RCprince]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_c5000_ur_6.jpg



http://www.mhz-powerboats.com/en/archives/93/

http://www.mhz-powerboats.com/nggallery/page-14/album-1/gallery-1/page-4


Mystic C 5000

license agreement for the sector model assure
We were the original design data of the boat provided.
Thus, we are able to
You a boat of the current series for 2008 presenting
which in all respects to the original expectations.

From 26 January 2009, the Mystic C 5000 in two sizes.

113 cm in length glass fabric for the price of 259 €

In Carbon / Kevlar at a price of 329 €

185 cm in length glass fabric for the price of 749 €

In Carbon / Kevlar at a price of 879 €

(incl. VAT. without postage)

Update

With sufficient demand (demand) is for the autumn of 2009

the production of a Mystic C 5000 in 245 cm length suggested

Enjoy it!

Ernest Zavarsky (MHZ)



VIDEO http://www.youtube.com/watch?v=_FeBuQUojuc

[RCprince]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_heilbronn_12.jpg

[RCprince]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_heilbronn_2.jpg

[RCprince]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_heilbronn.jpg

[RCprince]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_heilbronn_3.jpg

[Ub Hauled]

Going to say it again... it deserves it.
Crap that is gorgeous!!! Even the little turbines (she has 2 turbines under the hood)!!!

[bonewar]

WOW THAT CAT SOUNDS AWESOME!!!! VERY IMPRESSIVE!! CAN I HAVE ONE?:rockon2:

[Ub Hauled]

Rick, for $4000/ea. turbine (small ones)/starter/tank/engine data terminal, 329+ euros for the hull, $300 for hardware, plus 10 oz/min of fuel... SURE, you can have one!
:thumbup:

[bonewar]

Rick, for $4000/ea. turbine (small ones)/starter/tank/engine data terminal, 329+ euros for the hull, $300 for hardware, plus 10 oz/min of fuel... SURE, you can have one!
:thumbup:

WELL OK !! WHEN I WIN WIN THE LOTTERY.:rockon2:

[westbeach]

RCPrince,

Do you know who shaped and molded this C5000 cat for MHZ? Does Ed Z does it himself or someone else?

[RCprince]

Not sure, the video says by christo.

[Gerwin Brommer]

Christo = Chris Tonn
That's the owner and builder of the first boat out of the mould.
Who shaped this boat ?
The CNC-machine did !
MHZ received the original 3D software from Mystic powerboats.


By the way : Chris Tonn is THE "CT" in CT03/04 etc etc .

[Jeff Wohlt]

I e-mail John at Mystic Boats on a regular basis. I am sure he would love to see this one.

[RCprince]

I e-mail John at Mystic Boats on a regular basis. I am sure he would love to see this one.

I think John should know already , According to Ernest @MHZ they have the exclusive license contract from Mystic to make the Boat.

[westbeach]

A turbine version would be way way cool to own that is. But a fast electric version would probably suit the budget. :tongue_smilie:

[Ub Hauled]

A turbine version would be way way cool to own that is. But a fast electric version would probably suit the budget. :tongue_smilie:

I agree, you could get the smaller version of the hull and run a couple of 1521 NEUs...
that would be very cool to see. I think the most attractive part of the hull, besides the shape, is the real latest Bud paint job... that would be a killer!!!!

[Sword]

http://www.mhz-powerboats.com/wp-content/gallery/mystic-erstellung3d/mystic_c5000_ur_6.jpg



http://www.mhz-powerboats.com/en/archives/93/

http://www.mhz-powerboats.com/nggallery/page-14/album-1/gallery-1/page-4


Mystic C 5000

license agreement for the sector model assure
We were the original design data of the boat provided.
Thus, we are able to
You a boat of the current series for 2008 presenting
which in all respects to the original expectations.

From 26 January 2009, the Mystic C 5000 in two sizes.

113 cm in length glass fabric for the price of 259 €

In Carbon / Kevlar at a price of 329 €

185 cm in length glass fabric for the price of 749 €

In Carbon / Kevlar at a price of 879 €

(incl. VAT. without postage)

Update

With sufficient demand (demand) is for the autumn of 2009

the production of a Mystic C 5000 in 245 cm length suggested

Enjoy it!

Ernest Zavarsky (MHZ)



VIDEO http://www.youtube.com/watch?v=_FeBuQUojuc

I have seen the real boat, The name says it all.:rockon2:
I will buy one of the 1300 long cats, when will they be ready?

[Gerwin Brommer]

In about a week , or two.

[Sword]

In about a week , or two.

OK I will get back to you in two weeks.

[Gerwin Brommer]

To me ?
Just send an email to Ernest (MHZ), that will do.

[Gerwin Brommer]

Update ; the first one is there !

[Sword]

Update ; the first one is there !

Is this one for sale Gerwin?

[EPower]

Oh yeah that is a nice cat :thumbup1: How long is that ?

[Steven Vaccaro]

Update ; the first one is there !

You are a lucky man! :thumbup: How will you power it?

[lomdel]

...I think the most attractive part of the hull, besides the shape, is the real latest Bud paint job... that would be a killer!!!!

Which paint job is that? Any pics or links?

[Gerwin Brommer]

The 113 Mystic doesn't belong to me !
By the way, you can order the hull from MHZ with designcloth in it !!

[Sword]

To me ?
Just send an email to Ernest (MHZ), that will do.

Can you give me Ernest's email please.

[Gerwin Brommer]

E-Mail: info@mhz-powerboats.com

[Stealth Assassin]

Christo = Chris Tonn
That's the owner and builder of the first boat out of the mould.
Who shaped this boat ?
The CNC-machine did !
MHZ received the original 3D software from Mystic powerboats.


By the way : Chris Tonn is THE "CT" in CT03/04 etc etc .

Gerwin,
no wonder the lines are so perfect!

[Stealth Assassin]

Wonder how much room Is under the hatch??? :spy:

[Gerwin Brommer]

Just to make clear :

CT did not design the Mystic.
He only built the first boat that came out of the mold.

Mystic powerboats has asked MHZ to produce a model of their offshorecat.
Therefore they gave MHZ the original data of the hull.
That info was put into the computer, and put into the CNCmachine.
That's why the boat is looking so sharp.

How much space in the hull ? where ? between tunnel and cockpit ?
or in the sponsons ??

[Stealth Assassin]

I was wondering the height from the tunnel floor to the top of the canopy on the 113cm boat? To cramped for a zen?

[Stealth Assassin]

That info was put into the computer, and put into the CNCmachine.
That's why the boat is looking so sharp.

??


Yeah I figured that. I am doing the same thing now with a cat for gas at 44". The cad work Is 95% done. Prototype was built before cad work and a couple laser cut wood kits will be made asap for further testing.
I know a guy a couple states over that has stepped Into cnc work with a large enough machine to do the work.
There Is also a FE style rigger being drawn up now for a 260 zen.
I can't wait...

[Stealth Assassin]

Do you know what the plug was cut from?

[Gerwin Brommer]

Plugmaterial is " Cibatool" or "Renshape"

small hull : 80mm from tunnel to highest point of canopy
90mm from deepest point in sponson to deck

[lomdel]

The 113 Mystic doesn't belong to me !
By the way, you can order the hull from MHZ with designcloth in it !!

I'm sorry if I sound uninformed, but what is "designcloth"? 113cm is a bit long for an everyday racer isn't it?
I would like to see H&M's new 620mm Agitator S hull released soon though...

[Gerwin Brommer]

Lomdel :

By designcloth I mean colored carbon woven cloth etc etc .
The first one sold has blue/black carboncloth in it !

By the way : i think that 99.9% of these boats will be used for SAW or PrivateFun, not for racing.

[lomdel]

Any news on the availability of the 113cm version and its hardware?

[Gerwin Brommer]

Last weekend we had a meeting in Holland, and even Ernest showed up, with his shop.
Both hulls, 185 and 113 are available.

Picture : 3x mystic 185 , FE, 10S, 3060 Lehners

[Norman2]

Hi, By christmas I will own an HPR cat before I pass away. Your boats are just
the best in the world. Regards
Norman2

[Gerwin Brommer]

Norman,

This topic is about the Mystic from MHZ, not the HPR Mystic :laugh:

[lomdel]

Last weekend we had a meeting in Holland, and even Ernest showed up, with his shop.
Both hulls, 185 and 113 are available.

Picture : 3x mystic 185 , FE, 10S, 3060 Lehners

I am not able to find a priced listing of the 113cm MHZ C5000.:confused1: Please provide link Gerwin.

[Gerwin Brommer]

I suggest you read the first posting in this topic carefully , hahahahahaha !!

[kevinlew211]

Last weekend we had a meeting in Holland, and even Ernest showed up, with his shop.
Both hulls, 185 and 113 are available.

Picture : 3x mystic 185 , FE, 10S, 3060 Lehners

Gerwin,
what kind the stand they used??? i like it, where i can get one?

[Gerwin Brommer]

I was surprised by the quality of the Mystic hulls.
The 113 even had a sandwich under the deck !

Small impression of the meeting in Sneek, Holland :

http://www.e-powerboat.de/include.php?src=bilder/thumbnails.php?album=75

[lomdel]

I suggest you read the first posting in this topic carefully , hahahahahaha !!

I had that coming. Gerwin, I did read it, but what I was looking for I found in the meantime : http://www.mhz-powerboats.com/shop/shop.htm . Why doesn't it feature on the MHZUSA site yet?

[focused]

I was surprised by the quality of the Mystic hulls.
The 113 even had a sandwich under the deck !

Small impression of the meeting in Sneek, Holland :

http://www.e-powerboat.de/include.php?src=bilder/thumbnails.php?album=75

Gerwin ,

Just finished my photo-Album impression from Sneek 2009 with great shot from the Mystics in action.

http://www.xs4all.nl/~focused/sneek2009/images/IMG_6216.jpg

and more on http://www.xs4all.nl/~focused/sneek2009


Michiel.

[Gerwin Brommer]

Nice ! Thanks Michiel !!

[Gerwin Brommer]

Lomdel :

I've heard that the owner of MHZ-USA is a lazy person.

[TEAM_TnA_69]

a couple of nitro motors or huge brushless motors will destroy that thing for thousands less! hp/lbs boys, it's simple math? really?

[Rumdog]

huh?