TRUCKPULL
10-05-2022, 06:15 PM
Titanium turn fins for Sport Hydros and Riggers.
These fins will fit;
"P" limited Sport Hydros and some Riggers
"P" Sport Hydros and some Riggers
"Q" Sport Hydros and some Riggers
Turn fin includes:
(1) Turn Fin, no bracket, no screws.
$60.00 Shipped to Lower 48 East of Mississippi, West of Mississippi add $4.00
Bent radius is a little less then a Stainless Turn Fin, seeing that most people including me
are reducing the bend on the Stainless fins.
The sharpened edge is machined at 7 degrees, making the machined edge 3/8" long.
These fins will not bend as ease either. It took a 12 ton Hydraulic press to do the hook in the fin.1" radius - NOT a straight bend
Fins are 0.065" thick Titanium, and lighter and much stronger then the Stainless fins of the same size.
Size:
3 3/8" Tall
2 7/16" Wide
3/4" Hook on a 1" Radius bend.
Contact me here, MP me, or E-Mail
Larry Jaques
AKA - TRUCKPULL
These fins will fit;
"P" limited Sport Hydros and some Riggers
"P" Sport Hydros and some Riggers
"Q" Sport Hydros and some Riggers
Turn fin includes:
(1) Turn Fin, no bracket, no screws.
$60.00 Shipped to Lower 48 East of Mississippi, West of Mississippi add $4.00
Bent radius is a little less then a Stainless Turn Fin, seeing that most people including me
are reducing the bend on the Stainless fins.
The sharpened edge is machined at 7 degrees, making the machined edge 3/8" long.
These fins will not bend as ease either. It took a 12 ton Hydraulic press to do the hook in the fin.1" radius - NOT a straight bend
Fins are 0.065" thick Titanium, and lighter and much stronger then the Stainless fins of the same size.
Size:
3 3/8" Tall
2 7/16" Wide
3/4" Hook on a 1" Radius bend.
Contact me here, MP me, or E-Mail
Larry Jaques
AKA - TRUCKPULL