PDA

View Full Version : ul-1!!!



EATMYWAKE
02-07-2009, 04:05 PM
i'm getting the ul-1 fairly soon and i would like to know a few things first...

1. what 2s li-pos would get me to the amazing 65mph:bounce:

2. what the are the biggest 2s's i can fit in the boat:banana:

3. what prop do you guys recomend using for 3/4-1 mile ovals? the 65mph prop? assuming the prop is balanced and sharpened.:confused2:

4.what temps should i be running?

5. anyone know the balance point for the boat?

6. can i run on a single 3s li-po until i get my 2s li-po's

hope i didn' overwhelm you guys with questions, i think i'm forgetting some actualy. i'll post them if i remember!:zip-up::doh:
thanks in advance!

Ub Hauled
02-07-2009, 04:52 PM
1- 35c 5000
2- not sure
3- M445, the 65mph prop is not for ovals... I think it's a modded 2140, one of the other UL thread has it posted, and yes, ALWAYS assume they are used sharpened and balanced.
4- lipo no higher then 140, ESC no higher then 130, motor no higher then 130
5- just behind the sponsons, again, the other UL threads have that info.
6- It'll be kinda slow, but it's your boat, you can do what you want with it ;)

detox
02-07-2009, 05:54 PM
Modded Octura 2047 was the 65mph prop

Grimracer stated 3" - 3 1/4" behind sponsons is balance point. I like it slightly more forward.

egneg
02-07-2009, 06:35 PM
So far the fastest prop I have used is a Prather 225s that has been detongued and back cut. It is a bit faster than an M445 but still gives you good control and decent run times.