RossCo216
06-02-2020, 09:57 PM
So I just got the boat out for it?s first run on 3s and I am definitely pleased with the performance. I know there is room for improvement on the setup so I was curious what you all have learned about this hull.
I am running the stick 38mm prop with the turn fins set all the way down and angled back slightly. The strut is negative (-2mm) from level with the hull bottom profile. Battery 5000mah 50c is All the way back.
I think I am going to put an aluminum OSE 42mm prop on and see if it helps with the cavitation in the corners. Any ideas or help would be appreciated!
I am running the stick 38mm prop with the turn fins set all the way down and angled back slightly. The strut is negative (-2mm) from level with the hull bottom profile. Battery 5000mah 50c is All the way back.
I think I am going to put an aluminum OSE 42mm prop on and see if it helps with the cavitation in the corners. Any ideas or help would be appreciated!