PDA

View Full Version : CNC props



Boatman
12-31-2008, 08:20 PM
Mention was made that OSE will carry CMDI or another line of props. I am wondering if that will be struck up anytime soon. Also If the demand for S&B props are such high demand how often are you stocked? I tried S&B my own but I stink at it. Is there any contacts for a set of tuned props? Thanks

Steven Vaccaro
01-01-2009, 08:42 PM
There are only a couple of guys that s&b props for a living so stocking these is tough. cnc props would be nice but the sizes available are not very useful for our boats yet. But that will soon change.

Boatman
01-15-2009, 07:00 PM
NICE! They look sharp. No pun intended. Reasonable costs as well. Thanks

Boatman
01-15-2009, 07:03 PM
Oh, are the ones in stock for 3/16" prop shaft?

RCprince
01-15-2009, 08:07 PM
Are there gonna be any right handed 3657/4 or 3857/4?

kevinlew211
01-15-2009, 08:12 PM
will they make 2 blades prop as well? what i see OSE stocking is more than SAW prop for us, example 50mm, 83mm pitch (more than 3 times than Octura x series) plus 3 blades, i try to pick up a pair for my twin 1527 cat but im kinda scare.

Steven Vaccaro
01-15-2009, 08:46 PM
They are working on 2 blades. I tested on this summer, but I asked for a few changes. Than fall came and it was put on the backburner. I have to get on them about it again.

Boatman
01-15-2009, 09:49 PM
Oh, are the ones in stock for 3/16" prop shaft?

????

cacofonix
01-16-2009, 04:09 AM
hi folks

very interesting , many people here in france are looking for andy CNC propeller
but most of them for M1 or M2 boat

is there a data sheet some where that sum up all available propellers and hull size they work with ???

thanks

Ub Hauled
01-16-2009, 04:34 AM
is there a data sheet some where that sum up all available propellers and hull size they work with ???


Email these people here, they are the ones that make the props...
they are good in replying emails.

http://www.cmdracing.com/updated/main.htm

Steven Vaccaro
01-16-2009, 09:58 AM
They are for 3/16" shafts. I have to add that. Thanks!!

I will stock different style props as they make them.

AntronX
01-23-2009, 06:05 AM
I would like 3 blader for 3/16" shaft, around 55 - 60 mm diameter and 1.4 - 1.5 pitch equivalent.