View Full Version : 1/8 scale hydro company’s for non builders
centralrcmystic
02-23-2018, 01:30 PM
Is the only way to acquire a 1/8 scale hydro to build from kit. Is there any other company’s that sell a completed hull. I’ve seen H&M and have the 1/10 scale.
157257157258157259
bob horowitz
02-23-2018, 09:19 PM
RC boat company makes 1/8 fiberglass and carbon fiber hulls. You would still have to fit them out.
centralrcmystic
02-23-2018, 09:45 PM
Ok great I’ll look into that. I’m fine finishing a boat out just not building from scratch
Tom G
02-24-2018, 11:54 AM
If you want to see a RC Boat Co 1/8 project Hull # SG121-Hlook at my build thread. . New 2004 Miss Budweiser T-6 Build This my second hull from RCBC both are all carbon fiber hulls WATCH HIS VIDEOS
Doug Smock
02-24-2018, 11:59 AM
If you want to see a RC Boat Co 1/8 project Hull # SG121-Hlook at my build thread. . New 2004 Miss Budweiser T-6 Build This my second hull from RCBC both are all carbon fiber hulls
https://forums.offshoreelectrics.com/showthread.php?58848-New-2004-Miss-Budweiser-T-6-Build
oscarel
02-26-2018, 09:29 PM
Justin, are you still in the dfw area? John is local and he builds a couple different hulls.
https://www.allrc1.com/lone-star-racing-boats
lambo
02-28-2018, 12:44 PM
Also read CatBoi's build thread:
https://forums.offshoreelectrics.com/showthread.php?55274-SG-121-H-unlimited-hydro-build
Beaux
03-01-2018, 10:19 AM
How long in inch's are these 1/8 scale boats ?
Tom G
03-01-2018, 11:05 AM
Modern pickle forks are around 45 inches + _ , older Round nose hulls are around 47 inches + _ depending on the original design for both styles
my RCBC Sg121h spec.s are
Hull Measurements:
Length 45 " Width 23-1/8" Tunnel 11-1/8"
A.P.L. 26-1/2" Depth 3-1/2" Picklefork Depth 12"
Cockpit Spar 6-3/4"
bob horowitz
03-02-2018, 08:19 AM
I was just thinking, Phil Thomas also makes hulls that are around 1/8 scale. Check him out also.
Bob
Beaux
03-06-2018, 10:28 AM
Thanks .
785boats
03-08-2018, 02:22 PM
Beaux.
Hydro & Marine also do some 1/8 scale hulls, if you are still looking for one.
https://www.hydromarine.de/Hulls/Hydroplanes/Hydro-Rennboote-bis-1400-mm:::130_2_29.html
Beaux
03-09-2018, 02:42 PM
Thanks, many nice boots at that link.
raptor347
03-09-2018, 03:51 PM
Depends on what boat you want to build. I have the Velasco molds. Only available in bagged carbon.
Beaux
03-09-2018, 04:21 PM
Nice looking hull.
centralrcmystic
11-09-2018, 12:17 AM
Soo I pulled the trigger on a sg 118 from rc boat company. Any cg info on a already running boat would be great. Also looks like everyone is sticking with the neu1527 1.5y for competition sake but if I don’t plan on competing would I still want to stay in the 850kv range and a 4070 size motor?
162508162509
meangenesracing
11-09-2018, 04:00 PM
Depends on what boat you want to build. I have the Velasco molds. Only available in bagged carbon.
What's the price tag on that hull? You sell them?
raptor347
11-10-2018, 05:15 PM
$800 plus shipping. Shipping is actual cost to where ever it's going. Plan $150 average.
meangenesracing
11-10-2018, 07:01 PM
$800 plus shipping. Shipping is actual cost to where ever it's going. Plan $150 average.
Too rich for my blood
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.