Jimmy Sterling
12-07-2008, 02:02 AM
Minicat USA Micro Hydro - Modified
This boat is a Minicat USA hull that I purchased off ebay, it was stripped of all its components. I had recently written off a Renegade Rigger :eek: so decided to transfer all of the gear from the rigger to the Hydro. When the hull was purchased it came with no hatch, so a new hatch has been made out of a sheet of clear plastic ( very handy to see if the boat has any water in it)
note : It is not know to have any water in it after a run
The boat has
- Watercooled 2600 kv BL outrunner motor.
- All Octura polished hardware.
- Castle creations Phoenix 25 amp speed controller.
- Octura x430
- E-sky charger.
- 2ch Futaba radio gear.
- Stock Servo.
- Carbon Fibre motor bulkhead.
- Carbon fibre rudder bracket
Nearly everything on this boat is custom, its is also very fast for its size. If you have ever seen a video of a stock minicat, this thing will smoke a stock minicat anyday. :bowdown:
The pictures attached are recent photo's, the boat has also had a recent run and all systems are go :thumbup1:
All you need is an 11.1v lipo around 1200 - 1500 mah and add water :banana:
I am asking $ 200 AUD + Postage
As I live in Australia I am not sure of postage for international buyers. I will also throw in a brand new OSE X432 S and B propeller, only run twice and is perfect condition :biggrin:
:spy: Thanks 4 lookin'
This boat is a Minicat USA hull that I purchased off ebay, it was stripped of all its components. I had recently written off a Renegade Rigger :eek: so decided to transfer all of the gear from the rigger to the Hydro. When the hull was purchased it came with no hatch, so a new hatch has been made out of a sheet of clear plastic ( very handy to see if the boat has any water in it)
note : It is not know to have any water in it after a run
The boat has
- Watercooled 2600 kv BL outrunner motor.
- All Octura polished hardware.
- Castle creations Phoenix 25 amp speed controller.
- Octura x430
- E-sky charger.
- 2ch Futaba radio gear.
- Stock Servo.
- Carbon Fibre motor bulkhead.
- Carbon fibre rudder bracket
Nearly everything on this boat is custom, its is also very fast for its size. If you have ever seen a video of a stock minicat, this thing will smoke a stock minicat anyday. :bowdown:
The pictures attached are recent photo's, the boat has also had a recent run and all systems are go :thumbup1:
All you need is an 11.1v lipo around 1200 - 1500 mah and add water :banana:
I am asking $ 200 AUD + Postage
As I live in Australia I am not sure of postage for international buyers. I will also throw in a brand new OSE X432 S and B propeller, only run twice and is perfect condition :biggrin:
:spy: Thanks 4 lookin'