Dr. Jet
12-06-2017, 03:08 PM
Here's what I have to offer. An untouched BBY Micro Hydro hull kit with your choice of hatches; either an "Old Time" piston boat or a newer turbine boat. Also included is 1/64" laser-cut ply formers and a carbon fiber drive shaft tube (reamed to 5mm I.D.) If you get it built in a reasonable time, I will send you a motor and speed controller to complete the project. Giftee should cover shipping via PayPal.
Also included is all the technical support you need along with links to the miscellaneous parts you may need to complete it. Do a search for my construction thread under BBY hydro for SSSH.
This is a great handling little hull and according to Randy, Bill O. got one to do 58mph. From my experience, that's just stupid fast for this hull and you must have absolute glass for a water surface. With my recommended setup, it will do about 30 and be rock-solid in reasonable chop. :cool2:
Also included is all the technical support you need along with links to the miscellaneous parts you may need to complete it. Do a search for my construction thread under BBY hydro for SSSH.
This is a great handling little hull and according to Randy, Bill O. got one to do 58mph. From my experience, that's just stupid fast for this hull and you must have absolute glass for a water surface. With my recommended setup, it will do about 30 and be rock-solid in reasonable chop. :cool2: