CNC props that match abc for my zelos 36

[RcJim]

Hello to all.I need the opinion of some experts in props as i have no idea (trying to learn some basics slowly).I am looking to change props on my zelos 36,after i tried to contact a couple people that some fellow members on the zelos 36 thread suggest me i had no results,one ignored me and the other was asking 35$ shipping for 2 props when i did a test here on the ose store and the shipping was 12.80$,i ask him back for a cheaper shipping method and got ignored also...i don't really care for the extra 20$ i just don't like when people take you for a fool,anyway that is another story and now to my main question.I am looking for this cnc props :https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-45-2-x1-9-Fahrfertig-rechts.html - https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-45-2-x1-9-Fahrfertig-links.html ,https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-46-2-x1-4-Fahrfertig-rechts.html - https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-46-2-x1-4-Fahrfertig-links.html , https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-47-2-x1-4-Fahrfertig-rechts.html - https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-47-2-x1-4-Fahrfertig-links.html - https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/cnc-alu-propeller-47-2-x1-7-fahrfertig-rechts.html , https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/cnc-alu-propeller-47-2-x1-7-fahrfertig-links.html ,https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-445-2--Fahrfertig.html - https://www.tfl-hobby.de/Propeller/Alu/Alu--CNC-Gefraest/41-mm-bis-50-mm/CNC-Alu-Propeller-45-2--Fahrfertig--links-.html.Is any of this sets close to the ABC props 1814-17-45 , 1715-17-45 , 1714-17-45? Sorry for all this links and my big post and i hope some one can spend some time and read my post and help me out a bit.
Thank you

[fweasel]

For what its worth, a set of balanced and sharpened props from a reputable professional will run you about $100-$130 plus shipping. I typically get my props shipped to me via USPS priority mail for about $7, but I would imagine international shipping is going to cost more. As you may already know, the ABC props are relatively scarce at the moment, but I've been told that more are on the way. You can also look into a set of counter rotating Octura x447 props as an alternative. I personally don't like CNC props and won't run them on my Zelos.

[kfxguy]

No none are those props are close to the abc props.

Sometimes when things are harder to get, people charge more money. If you were to try and get me to sell you one of my raw spares I'd want more money for it too because you can't find them right now. Unfortunately how things work.