View Full Version : Need help identifying this hull
teamgear1973
06-17-2017, 11:09 AM
Trades for this boat and was wanting to get ideas of what it is. Came wit all the hardware but needs to be paint and put together. This is my first electric boat so any and all help is greatly appreciated. Also need help with how I would go about painting it. https://uploads.tapatalk-cdn.com/20170617/ead260236212b032a6aa2fe9208ffebf.jpghttps://uploads.tapatalk-cdn.com/20170617/4b9cc46cdb3e5e7c91262018934c6e3b.jpg
Sent from my SAMSUNG-SM-J120A using Tapatalk
TRUCKPULL
06-17-2017, 02:22 PM
How long is it (tip of sponson to transom)
Can we see a picture of the bottom?
What material is it made of?
Larry
teamgear1973
06-17-2017, 02:37 PM
Here is a picture of the bottom. Will have measure it when I get to the house. Just trade a rc truck for it and I'm racing so it will be a while. Oh yea did say the heck and with truck racing give a boat
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-17-2017, 02:38 PM
Forgot pic with last posthttps://uploads.tapatalk-cdn.com/20170617/dc250342cba86fae7032214ebb467124.jpg
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-17-2017, 02:47 PM
ABS reinforced with kevlar. Came with all the hardware also
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-17-2017, 04:18 PM
Ok so I got the boat measured and it is 30 3/4 long
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-17-2017, 04:28 PM
Here another picture of the inside looks like fiberglass to me. https://uploads.tapatalk-cdn.com/20170617/c3dfc000ecc14c130d4d383ef3bf5054.jpg
Sent from my SAMSUNG-SM-J120A using Tapatalk
785boats
06-17-2017, 05:22 PM
Looks like a version of the 'Sober' from The Build R/C.
Yours doesn't have the two hatches in the sponsons for the twin motors. Or does it look like they've been patched?
http://thebuildrc.com/rc-boats/hulls/30-5-rc-ep-epoxy-fiberglass-twin-power-sober-boat-hull-white.html?___SID=U
TRUCKPULL
06-17-2017, 08:45 PM
Looks like a version of the 'Sober' from The Build R/C.
Yours doesn't have the two hatches in the sponsons for the twin motors. Or does it look like they've been patched?
http://thebuildrc.com/rc-boats/hulls/30-5-rc-ep-epoxy-fiberglass-twin-power-sober-boat-hull-white.html?___SID=U
I think that is it also.
Larry
teamgear1973
06-17-2017, 09:04 PM
They have been patched up
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-17-2017, 09:18 PM
I will have to agree with y'all. Just checked out the link and looks just like it. Now the question is how would I go about mounting the motor mount to the kevlar and the shaft tube for the flex shaft?
Sent from my SAMSUNG-SM-J120A using Tapatalk
teamgear1973
06-19-2017, 05:23 PM
What would this boat be classified as?
Sent from my SAMSUNG-SM-J120A using Tapatalk
TRUCKPULL
06-19-2017, 06:43 PM
Sport Hydro
Larry
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.