Mean Machine

[Newboater]

okay finishing up my Mean machine. 4082 1500kv seaking 180 amp esc. Going to run 6s lookig for props for the 60+ mph. Thanks

[dasboata]

445 or so !

[Newboater]

445 or so !

I was thinking more along the lines of a CNC 648. 1500kv on 6s is only 33,150 rpm

[dasboata]

I was thinking more along the lines of a CNC 648. 1500kv on 6s is only 33,150 rpm

CNC is junk 648 might run hot buy octura !!!

[Newboater]

I have a 180 ESC what temps do you think I would run with the 648. I have your 1814 and 1914 any thoughts on how they would be?

I take it this was your first post to me before you edited it:


I was thinking more along the lines of a CNC 648. 1500kv on 6s is only 33,150 rpm
---End Quote---
CNC is junk don't ask if you know better !!!
***************

[dasboata]

I have a 180 ESC what temps do you think I would run with the 648. I have your 1814 and 1914 any thoughts on how they would be?

I take it this was your first post to me before you edited it:


I was thinking more along the lines of a CNC 648. 1500kv on 6s is only 33,150 rpm
---End Quote---
CNC is junk don't ask if you know better !!!
***************
Yup that's it [emoji106]


Sent from my iPhone using Tapatalk

[Peter A]

You could try, detongued 447, 447/3, prather 230.

[Newboater]

You could try, detongued 447, 447/3, prather 230.
Might consider going three blade. 447/3 that sounds rather promising.

[Newboater]

Yup that's it [emoji106]

---End Quote---
CNC is junk don't ask if you know better !!!
***************
Sent from my iPhone using Tapatalk

Funny comment coming from the guy who sold me the 1814 after I told him the X645 I was running hit 52 and I wanted 55mph. Then when I tell you the 1814 did 1 mph less speed you say well it is basically the same as the x645. SO THEN WHY DID YOU SUGGEST IT

[dasboata]

here is your email get your story straight you asked me for the props I didn't suggest anything to you !!!these are going to be no lift props the speed will be up to you and yes B/S race ready I take pay pal !

In a message dated 11/7/2016 9:11:25 A.M. Eastern Standard Time, bulldogger_99@yahoo.com writes:
What would be the speed difference between the two. Also do these prop cause any weird lifting issues? Also I would need to know how to pay you and I assume these are all sharpened and balanced and ready to use
Dave



On Monday, November 7, 2016 9:01 AM, "Dasboata@aol.com" <Dasboata@aol.com> wrote:




Hi lets do a 1815/17* and a 1914 mod for the boat cost you 102.50 plus $4 or $7 to ship LMK thanks Chris

In a message dated 11/7/2016 8:48:30 A.M. Eastern Standard Time, bulldogger_99@yahoo.com writes:
Hi,
Kfxguy recommends you and I like him so...
I have a Proboat 31" mono running a 1650KV 6 pole. I am looking for either a 1814-17-45 or 1815-17-45 or even a 1915-17-45. Or if there is something else you recommend looking to get as close to 60mph as possible.
Thanks David

[Newboater]

Hi lets do a 1815/17* and a 1914 mod for the boat cost you 102.50 plus $4 or $7 to ship LMK thanks Chris

No I did ask you and you made the above suggestions and then sent me a 1814 when I thought I was getting the 1815, and I told you about it and your reply was well try the 1914 and let me know. I also told you I live near you, being you are in Centereach and I would drive over and swap the prop only to get no reply from you.... Then I pm'd you again about the 1814 making no difference and you stated it was going to have similar results to the x645. I also told you I thought you were suppose to be selling me a 1815 and you stated no, that I asked for the 1814 and I told you I didn't think so. So after going back and forth several times in the pm's you just confirmed to me you sent me the wrong prop.

My story is straight thank you for confirming it.

[dasboata]

I sent you a 1815 if you want to continue this threw pm maybe we can straighten this out


Sent from my iPhone using Tapatalk

[dasboata]

before he puts my PM up here ,,here it is Default Re: 18
Reply With Quote ReplyDefault Re: 1814
Quote Originally Posted by Newboater
Quote Originally Posted by dasboata
Quote Originally Posted by Newboater
Him,,,,,,,,,,, you sent me a two props in little zip lock bags labeled 1814 and 1914. You must remember I told you I live by you and I told you I though I was suppose to be getting the 1815. I also asked where you ran the your boats and you gave me video links.......I told you we were down at Artist lake and you stated you used to go there conversation........
I remember ,, our conversation about artist ,,,,,,,,,,,,,,Me My records say it was a 1815 but my wife does the books ???? ,send it back or sell it on OSE,,, and give me the $$$.. I will send you out what you want !, which is ?
Him,,,,,,,,,I told you originally when it came I would just drop it off to you. I also told you I would just pick up the two props to save shipping but you didn't want to do that either. I have the prop sitting in my prop box. I wanted originally 1815. The bag said 1814 so you tell me which one it is? I would have though an 1815 would be better then the 645 speed wise

Also a few people pm'd me about the mean machine prop and stated x648 would put it close to 60 so when you stated 445 that was pretty different, so I said wouldn't you need to go bigger? really didn't constitute the smart ass comment on your part.,,,,,,,,,
Me,,,,you know what its my house I don't need people coming in and out like a store,, I'm done with you ,, I'm trying to make things right and you keep going on and on there obviously is a mix up i'm trying to fix it & your not letting it go forward now you ca go f %^$ yourself

[Newboater]

First off, you said you wanted to do this through PM's but then you go public with it. You should have offered to correct the problem right away when I notified you, not just blow it off like you did. I post a question about a prop. You then make a suggestion. I ask another question and you respond like a dick. You suggest I sell it and give you the money or send it back to you. Why should I pay for your mistake? We are down at Artist Lake and you live close by. All you had to do was meet up with me, and we could have discussed it like grown-ups. Instead you tell me to f' off. That's fine. If this is the way you conduct yourself with business transactions, why would I ever want to do business with you again? I told you months ago when I received the prop it was wrong and you choose to do nothing. I was just going to let it go 'till your stupid comment. Compound that with the fact that you asked to do this through PM's and then went public shows you are not to be trusted.

[montymike]

Wow,:

[Beaux]

Hey, how did your Mean Machine turn out?

[Newboater]

Came out nice, might put it up for sale, started building a River cat

[Beaux]

Cool, I've got one with a tp 4070 I'm still getting it dialed in. Have a good day.