PDA

View Full Version : Ml SX400


Moonie
03-26-2017, 07:07 PM
I can use some help on this one. COG, strut location and rubber length? My 400 chops in the turns. 150540150539150541
cybercrxt
03-27-2017, 10:11 AM
Middle of the turn fin for the CG, and if you happen to be running a flat bottom strut, you need to change that to a round bottom, and you should be using an X series Octura 2 blade prop, or ABC 2 blade cleaver prop. Hope this helps! Mike
Moonie
03-27-2017, 03:37 PM
Middle of the turn fin for the CG, and if you happen to be running a flat bottom strut, you need to change that to a round bottom, and you should be using an X series Octura 2 blade prop, or ABC 2 blade cleaver prop. Hope this helps! Mike
Thinks Mike. It's all worked out now. Your the man and the boat is everything you said it would be on your web site.
Moonie
03-27-2017, 10:49 PM
https://youtu.be/teJt0FZc4qc
Here's a video with not to bad of a setup so fare.
cybercrxt
03-28-2017, 09:05 AM
Wow, great work! That thing is movin! I can't believe you are getting that kind of performance from a 1521 Neu. That is a large, heavier hull, so that is really impressive to me!
Moonie
03-28-2017, 02:55 PM
Wow, great work! That thing is movin! I can't believe you are getting that kind of performance from a 1521 Neu. That is a large, heavier hull, so that is really impressive to me!
Sorry Mike. I missed label that motor in my comments. It's a just a bigger 1527:frusty:
teamgear1973
06-14-2017, 09:36 AM
Dang that thing was toting the mail! Nice boat bud

Sent from my SAMSUNG-SM-J120A using Tapatalk
Moonie
06-20-2017, 04:51 PM
Dang that thing was toting the mail! Nice boat bud

Sent from my SAMSUNG-SM-J120A using Tapatalk
Thanks its getting a lil more tuned in now.
https://youtu.be/1IrxRqs0r5Y
Moonie
08-11-2017, 02:28 PM
https://m.youtube.com/watch?v=QhJ_XKhHcBc
I got the hopping all out. I found out what it was that was making the boat hop out the wayer
785boats
08-12-2017, 12:32 AM
So what was it?
Bp9145
08-12-2017, 12:45 AM
So what was it?

there was an alien driving that boat. . .crazy impressive speeds. . .you have a nice one there Moonie. . .:rockon2::cool2:
Moonie
08-15-2017, 02:15 PM
The turn fin was lifting the right sponsons. I adjusted the turn fin to hold it down.
Beaux
10-21-2017, 01:21 PM
Nice boat buddy.