BJV3 cut off problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TrashBoat
    Junior Member
    • Apr 2016
    • 6

    #1

    BJV3 cut off problem

    Hello im running a BJV3 with a Dynamite 1650kv motor with the stock Dynamite 120 esc with a Castle cap bank and im using 3s 50c 5000 batteries with a s/b 642 prop and after a minute or so it cuts off to about half power.All solder points look good.Does anyone have any ideas whats wrong?thanks for any help.
  • fweasel
    master of some
    • Jul 2016
    • 4279

    #2
    Could be the Low Voltage Cutoff built into the ESC. What's it currently set at? You can try lowering it to 3.2V, or possibly even turning it off as a test.
    Vac-U-Tug Jr (13mph)

    Comment

    • TrashBoat
      Junior Member
      • Apr 2016
      • 6

      #3
      I have been running it at 3.4v but next time I run it I will try it with it off and see what happens.thanks

      Comment

      Working...