PDA

View Full Version : BJV3 cut off problem



TrashBoat
10-24-2016, 03:36 PM
Hello im running a BJV3 with a Dynamite 1650kv motor with the stock Dynamite 120 esc with a Castle cap bank and im using 3s 50c 5000 batteries with a s/b 642 prop and after a minute or so it cuts off to about half power.All solder points look good.Does anyone have any ideas whats wrong?thanks for any help.

fweasel
10-24-2016, 04:57 PM
Could be the Low Voltage Cutoff built into the ESC. What's it currently set at? You can try lowering it to 3.2V, or possibly even turning it off as a test.

TrashBoat
10-24-2016, 08:32 PM
I have been running it at 3.4v but next time I run it I will try it with it off and see what happens.thanks