For Sale: complete hatch seal and bolt kits

[kfxguy]

I've had numerous people on here pm me and ask how to, and where to get the stuff for the way I seal my hatches. As you all know, I hate tape and I had to come up with a way to free myself from it. After being proven for over two years now, I feel confident this method is superior to anything else provided you install it correctly. If you need any tips or have any questions after you buy one of these kits, feel free to pm me. This isn't making me much money, I'm only doing this as a courtesy for you guys (and I'm getting tired of sending links of where to buy all this stuff from lol) as a convenience to you, so please don't try to Jew me down on the price. I think it's pretty fair considering how much all this stuff costs me. The hatch bolts alone are over 3 bucks each. Anyway, this is for:



***********heres a how to I put together for you guys. http://forums.offshoreelectrics.com/showthread.php?55417-My-hatch-bolt-method-step-by-step&p=669904#post669904 ***********

(4) stainless 8-32 knurled thumbscrews with 1" long thread. Cut shorter if you need to. I can order shorter ones if requested.
(4) rubber washers that go under the thumb screws
(4) o rings that you slip on the threaded part of the screw to keep them from falling out your hatch
(4) steel threaded t nuts that you jb weld under your hatch lip. I can provide stainless ones for $5 more if requested
5ft of high quality hatch seal. I've used this stuff for quite a while and it's very nice stuff. Curves easily. Does not peel up. Water proof. And lasts.

I'll sell the whole kit for $30 shipped in the U.S. And add $5 if you want stainless t nuts. I recommend a touch of anti seize every so often when screwing stainless into stainless. If you need higher quantities of anything, I can accommodate.


http://i218.photobucket.com/albums/cc243/ltzguy/15FD0E2F-3A55-42A3-8DF7-76E9730956B0.jpg (http://s218.photobucket.com/user/ltzguy/media/15FD0E2F-3A55-42A3-8DF7-76E9730956B0.jpg.html)


http://i218.photobucket.com/albums/cc243/ltzguy/2AE3D235-1183-4693-B081-8B425697A3F4.jpg (http://s218.photobucket.com/user/ltzguy/media/2AE3D235-1183-4693-B081-8B425697A3F4.jpg.html)

[Outboard]

Looks like a great kit, only if you were in Australia:Praying:

[kfxguy]

Looks like a great kit, only if you were in Australia:Praying:

Sorry...I'm sure shipping would be quite expensive

[Bp9145]

Hey guys, just want to say I know how much a set costs elsewhere, I have them on a couple of cats and believe me I don't think Travis is actually making any money here. Travis, you truly are an asset to this community. . .always willing to help out. So I'd like to be the first to order a set. Plz send me your PayPal addy if I already don't have it.
-Brian

[kfxguy]

Hey guys, just want to say I know how much a set costs elsewhere, I have them on a couple of cats and believe me I don't think Travis is actually making any money here. Travis, you truly are an asset to this community. . .always willing to help out. So I'd like to be the first to order a set. Plz send me your PayPal addy if I already don't have it.
-Brian


Thx. Pm coming.

Btw I'm drilling two holes in each t but for better grip for the epoxy. Make sure you scuff it and the bottom side of your rail with sand paper

[Bp9145]

Funds have been sent

[Zondar]

Just sent pM from Texas.

[kfxguy]

Just sent pM from Texas.

Please just post in the thread. Thx

[Zondar]

I'll take a set. Got your PM.Thx

[Jcarlton]

nice hatch kit kevin ... will pick one up when the funds are available !!!

[bonefisher]

I will take two sets... with the stainless upgrade on the T-Nuts please... thanks!

[kfxguy]

Thanks fellas. I'll send you tracking when they ship.

[nmnorth]

i'll take two of these if available , let me know, Bill

[kfxguy]

i'll take two of these if available , let me know, Bill

Yes sir. I have more parts for these kits arriving Monday or Tuesday. I knew it was a nice idea but didn't think they were gonna sell like hot cakes! Pm coming

[kfxguy]

Got your payment nmnorth. Thx. What name do you want me to put on the envelope?

[nmnorth]

william north is good, Bill

[Zondar]

Did you receive my PP payment?

[kfxguy]

Did you receive my PP payment?

Yes I did. Thx. I pre packed everyone's stuff over the weekend with what parts I have. A couple are going out this evening. I have more parts arriving today or tomorrow.....I wasn't prepared for them to sell this fast! It's ok, I have plenty of everything except the hatch bolts...they are expensive so I only had about 16 on hand but with the sales I've made I ordered a bunch more to have on hand for more kits. I'll pm each of you tracking numbers as your stuff goes out. Once again, thank fellas.

[Jesse J]

Hey, why not flooded stuffing tube kits?
What do you use to seal between stuffing and flood tube?

[kfxguy]

Funny thing is I've made a couple for people that asked me to. Too much work to make though really. This is what I do.


http://i218.photobucket.com/albums/cc243/ltzguy/99CB827F-E0E9-422D-AEFB-33708AD8CE9B.jpg (http://s218.photobucket.com/user/ltzguy/media/99CB827F-E0E9-422D-AEFB-33708AD8CE9B.jpg.html)

[Jesse J]

What dat shiny thing?

[kfxguy]

What dat shiny thing?



Dis? It's a aluminum fitting I machine to be epoxied into the flood tube. Then another carbon tube is epoxied in the center and then the brass is siliconed into it.



Let's get back on track.....your welcome to text me anytime Jesse


http://i218.photobucket.com/albums/cc243/ltzguy/EF220D8B-A5B4-4ECC-B585-68A4F774E1A0.jpg (http://s218.photobucket.com/user/ltzguy/media/EF220D8B-A5B4-4ECC-B585-68A4F774E1A0.jpg.html)

[Jesse J]

Sorry for diversion... Thanks Travis.

[kfxguy]

For the sake of me keeping track:
Brian yours shipped yesterday
Chris yours shipped yesterday
Bob yours shipped yesterday

[Doug Smock]

Moved thread out of the for sale forum.:wink:

[kfxguy]

Moved thread out of the for sale forum.:wink:

Thx and sorry if I put it in the wrong place.

[Doug Smock]

Thx and sorry if I put it in the wrong place.

No problem Travis!

[Bp9145]

Received my set. . .got here blazingly fast. . .as described. Thanks Travis
-Brian

[kfxguy]

Received my set. . .got here blazingly fast. . .as described. Thanks Travis
-Brian

Thx. Just to let you guys know, the next batch is going out Friday. I got thumb screws in today but I got home late from work. Didn't have time to go in the shop and get everything together. I get off work early tomorrow so I'll fill the remaining orders. Thanks fellas.

[kfxguy]

Bob did you get your package?

[Zondar]

Not as of yesterday.

[kfxguy]

Ok guys, just wanted to let you know I have a new option that will be available once they come in. I have some brass thumbscrews on order. What does this mean? Well you will now have to apply any kind of antiseize to the threads when you use the stainless t nuts. Because most of you may not want gold colored thumb screws on your boat they head will be powder coated satin black. I'll post pics when they come in.

[kfxguy]

Not as of yesterday.

I think I got you mixed up with someone else in Texas. I'm sending yours today. I apologize

[Zondar]

No worries!

[Hi8iS]

I will take 2 of the kits with black powder coated brass thumb screws! Thanks for putting these together!

[kfxguy]

Ok guys I did a how to thread for you on how I install these. Might give you some ideas. I also posted the link in the first post.



http://forums.offshoreelectrics.com/showthread.php?55417-My-hatch-bolt-method-step-by-step&p=669904#post669904

[kfxguy]

Got my son to make a holder for the bolts to powdercoat them.


http://i218.photobucket.com/albums/cc243/ltzguy/8A419324-D2B4-4D6E-8265-554E0AF86BFA.jpg (http://s218.photobucket.com/user/ltzguy/media/8A419324-D2B4-4D6E-8265-554E0AF86BFA.jpg.html)

[kfxguy]

Forgot to post an after picture. This is semi gloss black powder.



http://i218.photobucket.com/albums/cc243/ltzguy/9FBBBBD8-E7A4-46BB-9FDD-43DDFE1BB288.jpg (http://s218.photobucket.com/user/ltzguy/media/9FBBBBD8-E7A4-46BB-9FDD-43DDFE1BB288.jpg.html)