View Full Version : c.g. fightercat daytona
urbs00007
07-23-2016, 08:26 AM
what is a good starting point c.g. on a daytona 37 single motor set up ?
dmitry100
07-23-2016, 11:59 AM
SF 300 + TP 4060 or 4070's ... cell count and motor wind is something that Kfxguy might have to tell you here
urbs00007
07-23-2016, 12:51 PM
SF 300 + TP 4060 or 4070's ... cell count and motor wind is something that Kfxguy might have to tell you here
C.G. is center of gravity, where the boat balances.
dmitry100
07-23-2016, 01:09 PM
I see, ask kfxguy.
jim82
07-23-2016, 06:18 PM
I've had this hull do right at 80mph with the CG at 27%. If you think you are going to be doing more than that you may wanna start at 30% that is what the recommended CG for most hulls anyway.
urbs00007
07-23-2016, 08:05 PM
I've had this hull do right at 80mph with the CG at 27%. If you think you are going to be doing more than that you may wanna start at 30% that is what the recommended CG for most hulls anyway.
thanks. that measurement is from the rear sponson trailing edge to the bow, right ?
jim82
07-23-2016, 08:39 PM
Yes, not the over hang
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.