My first FE 45inch Aussie built Thugar EVO running 12S

[Muz_zz]

Well only new here but love the site so much knowledge
You guys have a great forum here for electric setups

Well I bought a built boat a 45 inch Thugar EVO capsule with Kevlar carbon fibre inlay
It runs a TP 5850 600kv with a swordfish 300A pro + ESc on 12s
Packs are revoelectric 5500mah diamond series

Have only just got the software up and running for the ESC so a lot to learn how to translate it and know what it means

I have only run the prop that came with the boat measures 58mm and pitch looks to be 1.4

So any recommendations on prop size would be great

I have pulled it down to tidy it up and getting it ready to run in the next week
Got a GPS to put in and see what it runs

Hope you guys can help me to get this boat crackin

http://i169.photobucket.com/albums/u225/muz_z/ba5b252d81831570e81719c0d308762e_zpsexfnvhx6.jpg

http://i169.photobucket.com/albums/u225/muz_z/b6053ac9b67fb4c6aaaa1e9e21659d4a_zpswnazwxry.jpg


http://i169.photobucket.com/albums/u225/muz_z/cb058021f0fb189c1c93e46abed87c78_zpschrfyurt.jpg

http://i169.photobucket.com/albums/u225/muz_z/2e9b724a04563ee00ed4b78b085d1825_zpsl2sm9fby.jpg


Any help would be greatly appreciated

[Muz_zz]

I have tidied up the connectors as they were very messy

I have put all 8mm bullets all round, shortened th wires from The ESC to the motor

The wire from the ESC were soldered very bad, three wires in the one solder joint (including cap bank)wasn't nicely done so I used a electrical cable reducing link 10mm one side and 6mm the other side, much cleaner setup