PDA

View Full Version : Tenth scale Allison engine?


Jesse J
12-12-2015, 09:16 AM
Who knows where to get a good looking engine for my nhydro?
I've seen the wooden ones, but was hoping for something more detailed and one piece.
Thanks!
sivadmatt
12-12-2015, 10:12 AM
This is been a topic of discussion in our club between the guys that run scale boats. I've heard of a few different guys making resin engines but I have yet to see any product. Maybe we can talk the classic hydro guys into offering a composite and would engine kit.
JimClark
12-12-2015, 11:52 AM
There is one of PSFE members that is working on a 3d printed one he has a page on facebook. Also I think Mitch Dillard is making some motors as well as Craig Bradshaw Mitch is Coug90 OSE

Sent from my SM-G900T using Tapatalk
JimClark
12-12-2015, 12:18 PM
See if this is what you are lookign for

http://www.scale-3d.com/products
Jesse J
12-12-2015, 02:56 PM
Beautiful! They seem a bit heavy? 7.5oz for turbo version? Any way to make it lighter?
I may get one to see if it will work, thanks Jim!
I'm still open to other ideas...
JimClark
12-12-2015, 03:05 PM
I do not have one in my hands send Jim an email I am sure he could help you maybe there is another lighter material he could make it out of.

Sent from my SM-G900T using Tapatalk
leonard feeback
12-13-2015, 06:19 PM
Jesse, sometimes a little extra weight will help if running in rough water conditions. Motor looks nice and you don't have to make it yourself. Everything can't be perfect. 7.5 oz isn't bad.
Jesse J
12-22-2015, 07:45 AM
I do not have one in my hands send Jim an email I am sure he could help you maybe there is another lighter material he could make it out of.

Sent from my SM-G900T using Tapatalk

Thanks for the tip!
After a couple emails he was able to shave off one ounce.
Maybe I do a build thread.
JimClark
12-22-2015, 11:42 AM
You moght be able to hollow something out also

Sent from my SM-G900T using Tapatalk
revoltrunner
12-26-2015, 02:17 PM
I received my 1/10 Merlin today.
nice kit and great service.
http://www.scale-3d.com/products
Jesse J
12-26-2015, 08:25 PM
Oops double post
Jesse J
12-26-2015, 08:27 PM
Yep, just got my turbo Allison too and have it here in the living room. Got some paints today and have started sanding down the headers. Might get some paint on tomorrow. Pics coming soon.
What's yours going in, Jeff?
JimClark
12-26-2015, 08:41 PM
Have either one of you figured a way to lighten them yet? Also is the material used brittle at all?
revoltrunner
12-26-2015, 09:13 PM
Yep, just got my turbo Allison too and have it here in the living room. Got some paints today and have started sanding down the headers. Might get some paint on tomorrow. Pics coming soon.
What's yours going in, Jeff?

It's going in a Pay N Pak


Have either one of you figured a way to lighten them yet? Also is the material used brittle at all?

the Merlin weighs 4.4 oz
the material is hard and stiff. it doesn't seem brittle.
Jesse J
12-26-2015, 09:26 PM
Don't know that much more can be done to reduce the weight.
2nd the not brittle. In fact very hard to sand!
Mine is supposed to be 6.5... Didn't check yet.
I'm putting mine in the u3 Cooper racing.
sivadmatt
03-20-2016, 10:31 PM
ready to go in my 1/10 u-3
JimClark
03-20-2016, 10:40 PM
Is that from Jim Stevens?


ready to go in my 1/10 u-3
sivadmatt
03-20-2016, 10:54 PM
Scale-3d.com I do not remember the gentleman's name. I sent an email palpayed so money got it 3 days later. Very happy with the quality and the appearance.
JimClark
03-21-2016, 02:57 AM
Yes that is Jim

Sent from my SM-G900T using Tapatalk
RandyatBBY
03-21-2016, 11:51 AM
I received my 1/10 Merlin today.
nice kit and great service.
http://www.scale-3d.com/products

I like the way the cylinders were made. Cool