Futaba steering servo choice

[Impulse31]

Hi all, I am :frusty: on choosing a good Futaba servo for my S-BUS2 install in my new pursuit hull. I have narrowed it down to 2 choices but I am not sure which one is best for the boat and racing. My main goal is not loose control or have any kind of servo stall when turning at high speeds.

BLS371SV S.Bus2 HV ProgrammableServo

FUTM0151>> Tech Notes
Volts Torque Speed
4.8 176 oz-in (12.6 kg-cm) 0.16 sec/60°
6.0 219 oz-in (15.8 kg-cm) 0.13 sec/60°
6.6 239 oz-in (17.2 kg-cm) 0.12 sec/60°
7.4 264 oz-in (19 kg-cm) 0.10 sec/60°
Motor Modulation Programmable
brushless digital S.Bus2
Dimensions Weight
1.57 x 0.79 x 1.45 in
(40.0 x 20.0 x 36.8 mm) 2.22 oz (63.0 g)
HV 2BB MG
Applications *Preferred
cars electric, gas*
boats yacht*, elec/gas*

BLS471SV S.Bus2 HV Programmable Servo

FUTM0155>> Tech Notes
Volts Torque Speed
4.8 127 oz-in (8.5 kg-cm) 0.11 sec/60°
6.0 158 oz-in (11.4 kg-cm) 0.09 sec/60°
6.6 174 oz-in (12.5 kg-cm) 0.08 sec/60°
7.4 192 oz-in (13.8 kg-cm) 0.07 sec/60°
Motor Modulation Programmable
brushless digital S.Bus2
Dimensions Weight
1.57 x 0.79 x 1.45 in
(40.0 x 20.0 x 36.8 mm) 2.01 oz (57.0 g)
HV 2BB MG

I am leaning toward BLS471SV because it has the speed, but the BLS371SV has more torque, what would be best on water during racing conditions?

Thanks,

[kfxguy]

Are you dead set on futaba?

[Impulse31]

I will be using the SBUS-2 for sensors and their servos seamed a logical choice minimize wiring. Are there issues with Futaba BLSxxxSV servos?