View Full Version : new ABC props
dasboata
06-20-2015, 07:46 AM
If Steve don't have them I am selling finished ABC 1615 -1815 L/R -2215L -2315 L/R $48 for the 1615,,,, & $50 for the other all finished and race prepped plus the shipping post here only thanks chris
ls1fst98
06-20-2015, 12:01 PM
the 2315, is that a bit bigger than a 457? if so ill take that pair and the 1815 if they are close to a 445
dasboata
06-20-2015, 01:57 PM
the 2315, is that a bit bigger than a 457? if so ill take that pair and the 1815 if they are close to a 445
The X457 are 2.24 X 3.136 the 2315 are 2.3 X 3.45 so a little bigger I can round the tips a bit if you want,,, the 1815 are 1.8 X 2.7 and the X447 are 1.85 X 2.59 plus ABC props are designed to be faster then octura LMK thanks chris
ls1fst98
06-20-2015, 02:25 PM
i think they will be fine as is, the 457 arent over heating anything at all. so it should be fine, and i was looking to go to 447 size any how. shoot me your pp and a total
ls1fst98
06-20-2015, 03:46 PM
Money sent! Thanks
dasboata
06-20-2015, 04:01 PM
received TY
Brushless55
06-20-2015, 04:16 PM
Chris, will the 1815 and 1615 work with Cats and Tunnels ?
thanks
dasboata
06-20-2015, 05:17 PM
Chris, will the 1815 and 1615 work with Cats and Tunnels ?
thanks
I don't see why not
Sent from my iPhone using Tapatalk
Brushless55
06-20-2015, 06:11 PM
I don't see why not
Sent from my iPhone using Tapatalk
Okay, pm me paypal details
let me know if you have a 1715 as well
thanks B55
dasboata
07-01-2015, 05:09 PM
still have sets and singles for sale !!!
Brushless55
07-03-2015, 02:12 AM
Chris, do you have the 1715 as well ?
dasboata
07-03-2015, 08:36 AM
Chris, do you have the 1715 as well ?
I just got them in : }
langevn
07-04-2015, 08:30 AM
hi iam looking for the similar match for 445 and 447 you have them
kfxguy
07-04-2015, 10:47 AM
hi iam looking for the similar match for 445 and 447 you have them
What setup are you running? Motor, escs, cell count? There's a new one coming out next week but it may be too much. Right now this is the choices you have:
1615 40.6mm I have some of these and they measure almost 42mm. They smoke a 642 in speed.
1715 43.2mm I have these too but haven't tried them yet. I'm sure it's the same story
1815 45.7mm these are faster than the m645 and m447 in some instances.
Hit Dasboata up I'm sure he has them all in stock.
Then he's coming out with a 1915. 48.3mm. I'm not sure if they will be offered in left and right versions but I'm sure they will. It may be a little much for you. The 1815's have proven to be over 100mph props with ease. That's what I would get in the place of 447's and the 1615's in place of the 442's. Hit Dasboata up I'm sure he has them all in stock.
langevn
07-04-2015, 06:18 PM
miss vegas duce motor 3674 leopard 4 pole 120 esc hobbywing 2x 7.4 zippy ipo 5600mha 45c 5.5 bullit conection
right now i have x442/2
kfxguy
07-04-2015, 06:52 PM
miss vegas duce motor 3674 leopard 4 pole 120 esc hobbywing 2x 7.4 zippy ipo 5600mha 45c 5.5 bullit conection
right now i have x442/2
I think I'd go with the 1615-17-45 pair. They would be very comparable to what you have but a good bit faster.
langevn
07-04-2015, 08:05 PM
i have 1 motor and running 2 blade prop now x442
langevn
07-04-2015, 08:13 PM
i have 1 motor and running 2 blade prop now x442
kfxguy
07-04-2015, 08:29 PM
i have 1 motor and running 2 blade prop now x442
That prop I recommend should be about 5+mph faster. A 642 ran 52ish on my little mono and this prop ran almost 56. A 642 would be even faster than a 442 (if your motor can turn it)
dasboata
07-05-2015, 09:24 AM
hi iam looking for the similar match for 445 and 447 you have them
I can hook you up best to PM or email me at dasboata@aol.com thanks chris
Brushless55
10-27-2015, 01:13 AM
Chris, do you have the 1515 version of this prop in stock ?
thanks
Leeandre
10-27-2015, 06:19 AM
Chris I am looking for a prop for my fighter cat cheetah,I spun an x448 pretty well ,oh it has a TP 4070 on 6s what would you recommend ?
dasboata
11-01-2015, 09:17 PM
Guys I just saw this can I still help you ?
Sent from my iPhone using Tapatalk
Brushless55
11-02-2015, 09:31 PM
yes...
macace123
11-02-2015, 10:31 PM
ill take a 1615L 1815L add it to the H4
macace123
11-02-2015, 10:34 PM
i also need a 1816 L
Leeandre
11-03-2015, 05:22 AM
Hi Chris ,I have a fightercat cheetah with a TP 4070 ,I currently have an x448 what would you recommend for a little extra speed without too much strain on the electronics ,thanks .
dmitry100
11-03-2015, 10:03 AM
1715 would prob be a good one.
Does the x448 heat up the hardware?
dasboata
11-03-2015, 10:23 AM
I don't I have the 1515 the best I can do right now reduce a 1715 if you want a 17* only prop I can order some in for next week ! LMK thanks chris ,
dasboata
11-03-2015, 10:26 AM
Chris I am looking for a prop for my fighter cat cheetah,I spun an x448 pretty well ,oh it has a TP 4070 on 6s what would you recommend ?
one of mine !
dasboata
11-03-2015, 10:28 AM
ill take a 1615L 1815L add it to the H4
I have the 1615 on order should be here by the end of the week is that cool ?
dasboata
11-03-2015, 10:29 AM
Hi Chris ,I have a fightercat cheetah with a TP 4070 ,I currently have an x448 what would you recommend for a little extra speed without too much strain on the electronics ,thanks .
hows the temp now ?
dmitry100
11-03-2015, 12:03 PM
dasboata, Are there any 1.4p versions of new ABC's ?
kfxguy
11-03-2015, 12:25 PM
dasboata, Are there any 1.4p versions of new ABC's ?
Not yet but on the way at my request.....there will be a 1914-17-45 soon with others to follow
Leeandre
11-03-2015, 12:30 PM
Actually yes when I ran the boat with 6s x 2 parallel the esc got a bit warm but not on 5s. Would you say the prop is a bit big ,what would you suggest? Oh yes chris one of yours !
Leeandre
11-03-2015, 12:41 PM
The 6 s batteries were 6000s as well so it could have been because of excessive weight ,thoughts ?
dasboata
11-03-2015, 05:45 PM
Not yet but on the way at my request.....there will be a 1914-17-45 soon with others to follow
:tape: :tape: thank god for Travis
dasboata
11-03-2015, 05:47 PM
dasboata, Are there any 1.4p versions of new ABC's ?
yes there are,,, what were you looking for ?
kfxguy
11-03-2015, 05:58 PM
:tape: :tape: thank god for Travis
I hope that wasn't meant to be sarcastic.
I begged him for a few new numbers. Maybe I had influence, maybe I didn't. But I got a new chart today and there's a few numbers I begged for on the chart. I talked to him at lunch today for a while and I can tell you guys that the amount of choices we are going to have soon is phenomenal. The 17 degree rake series is going to be available in 1.4 pitch in a lot of the popular numbers. There's also some promising looking three blades on the way. Also higher pitch options too are on the way. This is going to be a game changer for a lot of people.
dasboata
11-03-2015, 06:33 PM
I hope that wasn't meant to be sarcastic.
I begged him for a few new numbers. Maybe I had influence, maybe I didn't. But I got a new chart today and there's a few numbers I begged for on the chart. I talked to him at lunch today for a while and I can tell you guys that the amount of choices we are going to have soon is phenomenal. The 17 degree rake series is going to be available in 1.4 pitch in a lot of the popular numbers. There's also some promising looking three blades on the way. Also higher pitch options too are on the way. This is going to be a game changer for a lot of people.
It was,,, : ) do me a favor when people specifically ask dasboata a question give me the respect to answer it myself its not the 1st time
dasboata
11-03-2015, 06:45 PM
i also need a 1816 L
I got you covered on all the props I will be in touch at the end of the week thanks Chris
dasboata
11-03-2015, 06:52 PM
Actually yes when I ran the boat with 6s x 2 parallel the esc got a bit warm but not on 5s. Would you say the prop is a bit big ,what would you suggest? Oh yes chris one of yours !
I have a 1914 in stock that will work !
kfxguy
11-03-2015, 07:18 PM
It was,,, : ) do me a favor when people specifically ask dasboata a question give me the respect to answer it myself its not the 1st time
You got it buddy, I was just trying to help you but nevermind.
dasboata
11-05-2015, 04:22 PM
ill take a 1615L 1815L add it to the H4
they are all here now I sent you a PM,,, please LMK if you are still interested thanks Chris
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.