PDA

View Full Version : 8.00mm Bullet Connectors


Steven Vaccaro
09-24-2008, 10:40 PM
I just got a bunch of these in stock.

http://www.offshoreelectrics.com/proddetail.php?prod=ose-8mmbullet
Raydee
09-25-2008, 07:05 AM
WOW, nice price on them.
andym
09-25-2008, 07:18 AM
Yep good price but are they needed? My 6mm bullets are running 150 amps and higher and do not get hot. I have found the biggest problem is the quality of the soldered joint. Any air bubbles or just a poor job equals resistance that equals heat.
Ub Hauled
09-25-2008, 12:17 PM
in extreme (SAW) setups I noticed a good difference...
tylerm
09-25-2008, 03:34 PM
Are there any bullets out there that you can get 8ga wire into?:bounce:
I know 5.5's are no where close.
Steven Vaccaro
09-25-2008, 04:39 PM
Are there any bullets out there that you can get 8ga wire into?:bounce:
I know 5.5's are no where close.


There's probably plenty of room for 8 gauge. I can allllllllllmost squeeze two 10 gauge wires inside. Measure your 8 gauge and I will let you know.
Steven Vaccaro
09-25-2008, 08:45 PM
It will take a wire with a thickness of 5.4mm !!