View Full Version : BJ 29 Stripped motor bolt
paDDY
09-05-2014, 03:28 PM
New to the FE boating. Just bought a new rtr and decided to epoxy the seams and wood so I removed everything in the boat I could. I guess I used a little too much muscle installing the motor back in the boat and stripped the nut that is in the motor mount. I don't really know what to do besides being mad at myself lol.
paDDY
09-08-2014, 02:03 PM
Nobody?
96motorhead
09-17-2014, 12:17 AM
Cut a slot in the screw head with a dremel and back the screw out with a flat head screw driver.
tlandauer
09-17-2014, 01:28 AM
Did you strip the blind nut that is under the wood?
BHChieftain
09-19-2014, 11:49 PM
Pour some epoxy into the hole and re-tap. Easy fix.
Chief
paDDY
09-22-2014, 02:06 PM
Thats the one. does not tighten up.
paDDY
09-22-2014, 02:08 PM
Did you strip the blind nut that is under the wood?
Yes, stripped the nut.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.