PDA

View Full Version : TFL Hobbies Pursuit P Mono



Doby
07-28-2014, 11:37 PM
After seeing these run really well in P-Mono at the FE Nats this year, I decided to actually buy one from Tom at AmpEater Racing...

Powered by a Leopard 4082 2200Kv with an older Castle 240 Lv ESC, running 4S2P. Used all TFL hardware except for the AQ Revolt trim tabs.

Hope to get it wet this weekend.

118642118643118644118645118646

czegard
07-29-2014, 12:00 AM
What prop do you have in mind? Is it a X447?

Doby
07-29-2014, 11:14 PM
What prop do you have in mind? Is it a X447?

Yup.

ron1950
07-30-2014, 10:37 AM
for racing I use a m445 and comes back in warm but not hot...might try a 447 or a cut down 545 next time out...

ray schrauwen
07-30-2014, 04:46 PM
Or an M545...

ray schrauwen
07-30-2014, 04:50 PM
John, may I ask how high the bottom of the strut is from the keel of the transom? I've got a Cyberstorm to finish building. Nice boat & build. I'd love to join you this weekend but, there is a yearly party with ole' highschool friends I go to. Bring it up to Lake Bellwood where I'll be :tongue_smilie: I'm hoping to run my 40" mono if I get it together in time.... Esc is in the Whip 40...

tjcast
08-10-2014, 01:55 AM
Looking really good John.

czegard
09-17-2014, 04:16 PM
John, Would you mind sharing the lengh of the rudder?

tjcast
09-17-2014, 10:30 PM
John, Would you mind sharing the lengh of the rudder?

If it isn't cut down, which it looks like it isn't, it is 130mm

czegard
09-17-2014, 10:58 PM
If it isn't cut down, which it looks like it isn't, it is 130mm

Thank you

Doby
11-14-2014, 11:01 AM
So a few Saturdays ago, I was at the pond with a few others (Ray S, Robert, Jack and Brian) running boats on a cold, windy, choppy day.

Robert (LiPo Power) had is DF 33, Neu powered mono and I had my Pursuit. Now his Kv rating is around 1850 and mine is 2200, but the speed difference was crazy...I was leaving him in my wake so easily and pulling away with just a simple light pull of the trigger...

Then we got the boats in after the run, and I pulled out my 2P setup....opps...grabbed a couple of 5S packs my mistake! Duhhhh...temps were fine though and it handled the extra voltage fine.

I did tell Robert so he wouldn't feel bad about his DF getting slaughtered!

pugman2
07-06-2015, 07:57 AM
i run 447 3blade and love it

CajunCanuck
03-12-2016, 04:42 PM
What happened to Ampeater?

Sent from my Nexus 6 using Tapatalk

bozo586
03-12-2016, 05:03 PM
What happened to Ampeater?

Sent from my Nexus 6 using Tapatalk

see post#7 or 9 tjcast is the person your looking fore.