View Full Version : piano wire shaft
royalcasa
07-21-2014, 12:34 PM
Looking to buy 3 sets of piano wire shaft for my EKOS C1 34 inch.
Thanks
I have some sets.
The set above the ruler are .078. The ones below are .062.
royalcasa
07-21-2014, 10:05 PM
I have some sets.
The set above the ruler are .078. The ones below are .062.
are the shaft 4mm
how much for the 2 .078
thanks
are the shaft 4mm
how much for the 2 .078
thanks
Those are 3/16th shafts.
I do have a pair of 062 to 4mm to 187 (3/16) step shafts. Allows you to use the 4mm struts with standard 3/16 props. they are 16.5 inches long. $30 shipped.
royalcasa
07-22-2014, 08:09 PM
Those are 3/16th shafts.
I do have a pair of 062 to 4mm to 187 (3/16) step shafts. Allows you to use the 4mm struts with standard 3/16 props. they are 16.5 inches long. $30 shipped.
do you have collets for the .062
do you have collets for the .062
My collets are in use in another boat. Sorry.
ron1950
07-29-2014, 05:36 PM
I have .062 colletts 21 dollars for all 3 or 8 dollars shipped apeace ...all in good shape but one will need 2 set screws not sure where they got off too all three are for 5mm motor shafts
118654
Big power
08-01-2014, 02:03 PM
I would like these if you still have them?
062 to 4mm to 187 (3/16) step shafts
Send me PM with paypal shipping to 03269
I would like these if you still have them?
062 to 4mm to 187 (3/16) step shafts
Send me PM with paypal shipping to 03269
PM Sent
Big power
08-01-2014, 08:32 PM
PM sent with address
Paypal should be there
Got it. Shipped USPS Priority Mail. Tracking # 9405903699300230510529
All the best,
Ray
Big power
08-02-2014, 09:21 PM
I bought some couplers that have a collet for the wire end. I got them here on OSE page. do those hold?
ron1950
08-02-2014, 10:00 PM
the kind that squeeze the wire byr screwing the end in tighter work great my last one broke off in the collet
I bought some couplers that have a collet for the wire end. I got them here on OSE page. do those hold?
I have been using these with great results.
pistol18
06-30-2015, 06:39 PM
I know this is old but figured I'd try. I picked up a like new EKOS and want to upgrade the collets and shafts.
Boat has the green 2850kv stock motors.
I'm looking to get 2 new prop shafts and upgraded collets, anyone still have anything?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.