piano wire shaft

[royalcasa]

Looking to buy 3 sets of piano wire shaft for my EKOS C1 34 inch.
Thanks

[RayR]

I have some sets.

The set above the ruler are .078. The ones below are .062.

[royalcasa]

I have some sets.

The set above the ruler are .078. The ones below are .062.

are the shaft 4mm
how much for the 2 .078
thanks

[RayR]

are the shaft 4mm
how much for the 2 .078
thanks

Those are 3/16th shafts.

I do have a pair of 062 to 4mm to 187 (3/16) step shafts. Allows you to use the 4mm struts with standard 3/16 props. they are 16.5 inches long. $30 shipped.

[royalcasa]

Those are 3/16th shafts.

I do have a pair of 062 to 4mm to 187 (3/16) step shafts. Allows you to use the 4mm struts with standard 3/16 props. they are 16.5 inches long. $30 shipped.

do you have collets for the .062

[RayR]

do you have collets for the .062

My collets are in use in another boat. Sorry.

[ron1950]

I have .062 colletts 21 dollars for all 3 or 8 dollars shipped apeace ...all in good shape but one will need 2 set screws not sure where they got off too all three are for 5mm motor shafts

118654

[Big power]

I would like these if you still have them?
062 to 4mm to 187 (3/16) step shafts


Send me PM with paypal shipping to 03269

[RayR]

I would like these if you still have them?
062 to 4mm to 187 (3/16) step shafts


Send me PM with paypal shipping to 03269


PM Sent

[Big power]

PM sent with address

Paypal should be there

[RayR]

Got it. Shipped USPS Priority Mail. Tracking # 9405903699300230510529

All the best,

Ray

[Big power]

I bought some couplers that have a collet for the wire end. I got them here on OSE page. do those hold?

[ron1950]

the kind that squeeze the wire byr screwing the end in tighter work great my last one broke off in the collet

[RayR]

I bought some couplers that have a collet for the wire end. I got them here on OSE page. do those hold?

I have been using these with great results.

[pistol18]

I know this is old but figured I'd try. I picked up a like new EKOS and want to upgrade the collets and shafts.
Boat has the green 2850kv stock motors.

I'm looking to get 2 new prop shafts and upgraded collets, anyone still have anything?