Swordfish 220 calibration

[icemanxo]

Hello,

I got a DX2E I want to make sure I did this right I turned throttle trim all the way up, held throttle down, plugged esc into battery, on the 4th beep I let the throttle go to neutral. Then a few moments later I pushed brake up and the motor started going so I had to turn throttle trim back to normal. Do I now have full 100% throttle I appreciate any help on this thanks. :help:

[icemanxo]

Was this the correct way to get full throttle of 100%

[crashland]

on the 220 + I have you leave the trim in the middle, Hold full throttle , connect battery, after second set of beeps, I think it beeps four times then pause then two beeps , then let it to neutral, thats it

[icemanxo]

on the 220 + I have you leave the trim in the middle, Hold full throttle , connect battery, after second set of beeps, I think it beeps four times then pause then two beeps , then let it to neutral, thats it

Thank you