Swordfish Pro+ 220A

[ezhitz]

Hi
I had a chance to finally try out my new swordfish esc which seamed to work ok without any heat issues some people seam to be having.
I what I noticed when reviewing to data log was I only seemed to get 92.8% max throttle. The radio is a Futaba 2Pl I adjusted the throttle
epa to 120%. Is there something else I should do.

Thanks Jack

[cacofonix]

hello

have you update firmware ?

[drwayne]

set the Tx to 100% ..calibrate the Tx throttle to esc.. then up the Tx to 120% . problem solved

[IRON-PAWW]

So..... when you say set tx to 100%, 120% etc ..... how exactly do you do that? Using throttle trim? About to set up my own 240a Swordfish and was wondering about this.

[ezhitz]

Thanks for the answers. I will try what drwayne said and try it again next weekend.

[drwayne]

So..... when you say set tx to 100%, 120% etc ..... how exactly do you do that? Using throttle trim? About to set up my own 240a Swordfish and was wondering about this.
digital trim width per channel.. from +120% → -120%.
set those at 100% both ends.
Now the fun part.
calibrate that to the esc via Rx



ezhitz... you will do fine :2thumbsup: