jworm49
12-05-2013, 06:51 PM
I should start out by saying I'm running a seaking 180 with disabled BEC and a Leopard 4082. I'm having RX trouble. Last time I ran the boat flipped over and when I righted it the boat would not respond to the radio. I brought it to shore and the ESC was emitting steady beeps which is what is does when not RX pack is hooked up so I figured it was just dead. A little water got into the pack I noticed that during charging but it charges and cycles fine. The thing is when I hook it up to the boat I get nothing just the steady beeping from the ESC. When I first hook it up the servo will twitch and the receiver lights up for a split second then nothing. If I plug in the RX pack backwards the receiver blinks rapidly. I also tried a rx back that just uses 4AA batteries and the same thing happens?