PDA

View Full Version : Push-pull dual arm rudder control



drwayne
10-01-2013, 09:59 AM
Searching for push pull rudder control for cat.
None around !
So
Spoke to this place who had som made cnc

Very cool !

http://shop.rcboatbitz.com.au/index.php?main_page=product_info&cPath=17&products_id=1653

srislash
10-01-2013, 06:21 PM
That appears to be for Speedmaster?

drwayne
10-01-2013, 07:01 PM
106039

rudder mount hole centers are 22.5mm(7/8") apart
Yes, it does fit the speedmaster brackets.

foryou
10-08-2013, 04:08 AM
yes, it's so cool...

Jlov
04-05-2014, 05:28 PM
Like this one from Kintec. It's the whole rudder system and it's $55 but sure is nice. Was a little to big for 37" Daytona I'm building.
113958113959

I used a smaller bracket and bent linkage so I could have a push-pull set up.
113960
113961

M3Man03
06-11-2014, 10:57 AM
Any thoughts as to where I can get a replacement set of just the cables & the sleeve?

flraptor07
06-11-2014, 01:06 PM
Any thoughts as to where I can get a replacement set of just the cables & the sleeve?

Kintec has just the cables and rams seperate. http://kintecracing.com/Hardware.html scroll down to almost the bottom.