PDA

View Full Version : programming 35 amp turnigy esc



rw442
09-03-2013, 04:28 PM
cant seem to get programmer to power up followed instructions and programmer is dead. Any help would be greatly appreciated. Ran boat this weekend and then on second battery boat died in water, Let everything cool down and tried again and motor was making screech sound and very hot. order another but I was thinking maybe esc was not programmed correctly and caused motor to fry .I am a newbee and really could use some help getting these problems corrected.

trigger
02-05-2014, 09:01 PM
You have to plug in the motor to the ESC and then to the programming box, lastly to the battery, it should then power up. I've had a screeching motor too, which resulted in buying a replacement. Hope this helps.