Nylon breakaway screw broke...

[Boat_guy]

Broke the nylon breakaway screw today on my ProBoat Shockwave 26 V3 brushless when I docked the boat too close to the shore.

What is the measurement of the screws? M3x10 or M3x8?

Need to buy a lot of those on ebay or something.

[srislash]

It should be a 3mm thread. Does it actually thread into the bracket or go right thru? My Geico goes right thru and I think I had to get a 12mm long bolt and nut.

[Boat_guy]

It should be a 3mm thread. Does it actually thread into the bracket or go right thru? My Geico goes right thru and I think I had to get a 12mm long bolt and nut.

It goes right through it, but not by much. Just enough for you to tighten the nut.

Decided to go through the manual and saw that the screw it uses is the M3x10mm philips head.

Thanks for the input btw!