Ozzypatrol
07-04-2013, 12:32 AM
Hi Folks!
The names BJ, all the way down in sunny old Western Australia. I have just purchased the MG 29 (looks like V2 but was in the old box), it came standard with the 60A ESC, programmer and a spare prop, Go figure?? everything I read said otherwise.
I have had previous exp with RC's had a modded HPI baja 5Bss, couple of nitro cars, had a boat about 15 years ago on 1 x NiMH. Couple of twin heli's. I'm a Sparky by trade, and bloody spun out at the technology in these new HV electrics.
Now to my boat.... Its all stock out of the box, Running 2 x 2S40C redback 5000mA batteries. Bloody quick!!!!! Anyway only got 2 runs in before having to go back to work, basically made sure everything was tight, charged the batts and thru it in the water. I have been reading and searching through this sub forum and google but need some basic answers:
-Has anyone got a diagram labeling the parts of the hull? ie. transom, sponsons etc... (have searched google images and nothing)
-I want to make the boat reliable, looking at replacing the plastic prop with an S/S one, I have read alot of guides and can't make much sense of it all.
-Any tips or minor mods I should do to the boat asap to make it run better, more efficient or ensure the boat has many years of service?
Once I get back home I will post a vid up of how the boat runs, hopefully get some feedback on what it is actually doing, if it is doing it right or needs improving. It handles like a dream runs almost all the way out of the water at full stick. The only thing I have done so far is move the batteries about 1/2" forward from the back of the battery trays.
Last one, back when I had my last boat (15yrs) it was suggested filling plastic zip bags with styra foam and placing inside the hull at the bow for floatation, is the required with the mG?
Cheers,
BJ
The names BJ, all the way down in sunny old Western Australia. I have just purchased the MG 29 (looks like V2 but was in the old box), it came standard with the 60A ESC, programmer and a spare prop, Go figure?? everything I read said otherwise.
I have had previous exp with RC's had a modded HPI baja 5Bss, couple of nitro cars, had a boat about 15 years ago on 1 x NiMH. Couple of twin heli's. I'm a Sparky by trade, and bloody spun out at the technology in these new HV electrics.
Now to my boat.... Its all stock out of the box, Running 2 x 2S40C redback 5000mA batteries. Bloody quick!!!!! Anyway only got 2 runs in before having to go back to work, basically made sure everything was tight, charged the batts and thru it in the water. I have been reading and searching through this sub forum and google but need some basic answers:
-Has anyone got a diagram labeling the parts of the hull? ie. transom, sponsons etc... (have searched google images and nothing)
-I want to make the boat reliable, looking at replacing the plastic prop with an S/S one, I have read alot of guides and can't make much sense of it all.
-Any tips or minor mods I should do to the boat asap to make it run better, more efficient or ensure the boat has many years of service?
Once I get back home I will post a vid up of how the boat runs, hopefully get some feedback on what it is actually doing, if it is doing it right or needs improving. It handles like a dream runs almost all the way out of the water at full stick. The only thing I have done so far is move the batteries about 1/2" forward from the back of the battery trays.
Last one, back when I had my last boat (15yrs) it was suggested filling plastic zip bags with styra foam and placing inside the hull at the bow for floatation, is the required with the mG?
Cheers,
BJ