bielc
07-10-2008, 09:14 AM
I recently flipped my BJ26 and as the boat floated upside down the motor would fire up and rev and the drive would turn back and forth up to the point when I flipped it back over. I had thought this may have been an interference issue. However when talking to other people with similar boats and (the same frequency) this does not happen.
It again happened yesterday without flipping the boat. I was walking around a house on the canal after removing some weeds from the rudders and the boat motor would rev (not fast but enough to get it moving) Go and stop, go and stop. This was occurring while I was approximately 50 ft away.
Long story short as this was happening the boat hit the sea wall and chipped the bow (not happy!)
Any ideas???:help:
It again happened yesterday without flipping the boat. I was walking around a house on the canal after removing some weeds from the rudders and the boat motor would rev (not fast but enough to get it moving) Go and stop, go and stop. This was occurring while I was approximately 50 ft away.
Long story short as this was happening the boat hit the sea wall and chipped the bow (not happy!)
Any ideas???:help: