PDA

View Full Version : Data logging on the BJ29



ozzie-crawl
06-16-2013, 08:27 AM
Got to have a quick run today and got a bit logging done with the eagle tree. Water was not the best as it generaly has a couple inches of chop and my setup is for those conditions and hull runs with no bounce. Water was dead flat and boat had a bit of bounce.
Setup is PB 1500kv motor on 6s with a m642 prop. After a 4 minute run motor and esc are not hot so have not bothered to temp them.
Peak amps are not bad and the esc handles it well being only warm to the touch.
Happy with the speed and think there is another few klmh with better water. But not bad for a sport setup and a rtr.